Quick-change battery compartment.
Charger jack.
(1) indicators
Solid yellow LED: AL - target detected
Flashing green LED: Pw - power on
Flashing red LED: BT - low battery indicator
(2) alarm signal
Sound mode: Buzzer with red LED
Vibration mode: Vibrator with red LED
(3) control
3 way switch
Forward position: S - sound on
Center position: O - power off
Back position: V - vibration on
(4) battery
Single 9 volt alkaline or ni-CD
Battery life: 30 to 40 hours (ni-CD)
28 hours (alkaline)
(5) dimension
Weight: 6.88 ounces (195g)
Length: 14.76" (375mm)
Width: 3.03" (77mm)
Thickness: 1.02" (26mm)
(6) operating temp
-15 to +45 degrees centigrade
CheckPoint security is your international source of security equipment. We try to provide the best and most economic products for our customers worldwide.
 Adopt the latest materialand technical, MCD Security Securewand Hand Held Metal Detector is high quality for high security requirement. Detects items of all types of metal: Ferrous and non-ferrous. Choice of sound alarm or silent vibration alarm. Easy to use, 3 position switch for power, sound and vibration. Sensitivity setting at optimum level-no tuning required. Uses one 9 volt battery. Low battery indicator. Manufactured in gray, Flame resistance
Quick-change battery compartment.
Charger jack.
(1) indicators
Solid yellow LED: AL - target detected
Flashing green LED: Pw - power on
Flashing red LED: BT - low battery indicator
(2) alarm signal
Sound mode: Buzzer with red LED
Vibration mode: Vibrator with red LED
(3) control
3 way switch
Forward position: S - sound on
Center position: O - power off
Back position: V - vibration on
(4) battery
Single 9 volt alkaline or ni-CD
Battery life: 30 to 40 hours (ni-CD)
28 hours (alkaline)
(5) dimension
Weight: 6.88 ounces (195g)
Length: 14.76" (375mm)
Width: 3.03" (77mm)
Thickness: 1.02" (26mm)
(6) operating temp
-15 to +45 degrees centigrade
CheckPoint security is your international source of security equipment. We try to provide the best and most economic products for our customers worldwide.
Â
A Tower Crane is an inverted L-shaped structure that is capable of lifting several tons of weight to precarious heights.
The most striking feature of this crane is that it is self-building and can allow a building to be constructed adjacent to or even around it.
Tower crane mast section ( tower crane mast and tower crane basic mast ) is a steel structure with a normally square section, whose main mission is to provide the tower crane with sufficient height.
Normally it is formed by lattice modules that facilitate the transport of the crane. For assembly, these modules will be joined by screws, all of which will be connected to the projected height. Its shape and dimension vary according to the necessary characteristics of weight and height.
BQ also supplying other Steel Structure spare parts of tower crane like Basic Mast Section, Fixing Angle (or Reusable Fixing Angle), Anchorage Frame,Telescoping Cage Jacking Cage, Tower Crane Yoke, Hook and so on.
Basic Mast Section,Tower Crane Mast,Crane Mast Section,Tower Crane Mast Section,Tower Crane Basic Mast
SHEN YANG BAOQUAN BUSINESS CO., LTD , https://www.bq-cranes.com