Water pump features Â
Diesel water pumps are single self priming centrifugal pumps manufactured from high pressure aluminum alloy castings.
Powered by air cooled and direct injection and 4 stroke diesel engine.
Heavy duty full frame protection;
Maximum displacement 296cc;
3Â inch suction and discharge ports.
 E-start is optional;Â
CHOCH  POWER provides a full line of brand new and high quality products.
Each and every unit is strictly factory tested before shipment.
Parts faults testing;
Fuel tank pressure testing;
Bolt tightening torque testing;
Painting thickness testing;
Voltage bearing and insulation testing; Noise testing;
Loading Testing to check verify that all control systems, alarm and shut-down protection.
 Photos ShowÂ
Main parameter
| Model | DPT80/E | |
| Engine Model | 178F | |
| Output Power (HP) | 6 | |
| Displacement (cc) | 296 | |
| Lube oil capacity (L)Â | 1.1 | |
| Discharge port Diameter mm(in) | 80/3" | |
| Discharge head (m) | 26 | |
| Suction head (m) | 7 | |
| Discharge capacity (m³hr) | 78 | |
| Fuel tank capacity (L) | 3.5 | |
| Product Dimension (mm) | 560*470*560 | |
| Net Weight | 59/69 | |
Features as followÂ
All diesel water pump units are ideal for industrial application or agricultural applications.
Â
All pumps have silicon carbide mechanical seals that resist corrosion, wear better and heat better than a standard seal.
Â
The long lasting high end silicon carbide seal are suited for heavy duty applications such as pumping contaminated and abrasive fluids.
Â
The cast iron impeller and volute will reduce vibration and wear on the mechanical seal and engine, allowing them to last longer for semi trash operations
Â
Excellent fuel consumption: average operating time for single tank of fuel: 12 hours Auto-return decompression for efficient starting at all temperature conditions,
Easy clean out, durable aluminum.
 Used in the process of the posibility of failure and solutionÂ
| Problem | Aause | Solution |
| 1,water pump not bibulous | Water diversion, water pump and pipeline leak. Suction height is too high, the direction of rotation is wrong, speed is not enough. Packing loose or badly worn. | Add water, tight water inlet joint screw, reduce the suction lift, change the direction of rotation, improve speed, compression packing or replace the packing. |
| 2,the flow rate is too low | Bottom valve jam, jams, impeller suction height is too high, packing wear. | Clear jam. Lower suction height, improve speed, change of packing. |
| 3,pump power consumption | The impeller wear, bearing damage. | Replacement. |
| 4,pump overall vibration. | Inappropriate fixed installation, damage of impeller, pump shaft bending. | Reinstall the fixed, replacement impeller, replace the spindle |
Â
1. Quick, efficient and professional response within 24 hours, 14 hours online services.
2. 10 years manufacturing experience in industrial field.
3. Technical support and solution by chief engineer.
4. Strict quality control system & team, high reputation in the market.
5. Full range of products for choice.
6. OEM services.
Contact usÂ
Company introduction
SHANGHAI CHOCH POWER EQUIPMENT CO.,LTD IS IN THE LAND SCRAPE SHORE OF EAST SEE OF CHINA----SALES DIVISION IN SHANGHAI, FACTORY IN WUXI CITY, IT IS A KEY BASE IN PRODUCING KINDS OFÂ GENERATORS IN CHINA PRESENTLY, SPECIALIZED IN THE DEVELOPMENT, MANUFACTURING, IMPORTING AND DISTRIBUTION FOR GENERATING SETS UP TO 500 KVA, DIESEL ENGINES, DIESEL WATER PUMPSÂ ANDÂ HIGH PRESSURE WASHERS BOTH GASOLINE GENERATOR AND DIESEL GENERATOR POWERED.
CHOCH POWER HAS DEVELOPED A LARGE RANGE OF GENERATING SETS AND ENGINES,WATER PUMPS IN ORDER TO COVER ALL NEEDS FOR PROFESSIONAL AND CONSUMERS.
THE SHANGHAI COMPANY WAS FOUNDED IN 2016 , MANAGERIAL PHILOSOPHY OF COMPANY IS THAT "TAKE PERSON WITH ABILITY AS BASEMENT, DEVELOP AND TRY TO BE PRACTICAL, QUALITY FIRST, SERVICE INTENSIVE" AND THE SPIRIT OF ENTERPRISE THAT "HOLD TOGETHER AND INNOVATION, KEEP ON AGGRESSIVENESS, PURSUE SUPERIORITY", IT WILL MAKE THE COMPANY TO EXPLODE CONSTANTLY AND IS HAS PASSED ISO9001: 2000 QUALITY SYSTEM CERTIFICATION, CE.
Â
Thank you very much for viewing this page, and wish you a nice day!
Please click the button "Send" to contact us.
Â
Water pump features Â
Diesel water pumps are single self priming centrifugal pumps manufactured from high pressure aluminum alloy castings.
Powered by air cooled and direct injection and 4 stroke diesel engine.
Heavy duty full frame protection;
Maximum displacement 296cc;
3Â inch suction and discharge ports.
 E-start is optional;Â
CHOCH  POWER provides a full line of brand new and high quality products.
Each and every unit is strictly factory tested before shipment.
Parts faults testing;
Fuel tank pressure testing;
Bolt tightening torque testing;
Painting thickness testing;
Voltage bearing and insulation testing; Noise testing;
Loading Testing to check verify that all control systems, alarm and shut-down protection.
 Photos ShowÂ
Main parameter
| Model | DPT80/E | |
| Engine Model | 178F | |
| Output Power (HP) | 6 | |
| Displacement (cc) | 296 | |
| Lube oil capacity (L)Â | 1.1 | |
| Discharge port Diameter mm(in) | 80/3" | |
| Discharge head (m) | 26 | |
| Suction head (m) | 7 | |
| Discharge capacity (m³hr) | 78 | |
| Fuel tank capacity (L) | 3.5 | |
| Product Dimension (mm) | 560*470*560 | |
| Net Weight | 59/69 | |
Features as followÂ
All diesel water pump units are ideal for industrial application or agricultural applications.
Â
All pumps have silicon carbide mechanical seals that resist corrosion, wear better and heat better than a standard seal.
Â
The long lasting high end silicon carbide seal are suited for heavy duty applications such as pumping contaminated and abrasive fluids.
Â
The cast iron impeller and volute will reduce vibration and wear on the mechanical seal and engine, allowing them to last longer for semi trash operations
Â
Excellent fuel consumption: average operating time for single tank of fuel: 12 hours Auto-return decompression for efficient starting at all temperature conditions,
Easy clean out, durable aluminum.
 Used in the process of the posibility of failure and solutionÂ
| Problem | Aause | Solution |
| 1,water pump not bibulous | Water diversion, water pump and pipeline leak. Suction height is too high, the direction of rotation is wrong, speed is not enough. Packing loose or badly worn. | Add water, tight water inlet joint screw, reduce the suction lift, change the direction of rotation, improve speed, compression packing or replace the packing. |
| 2,the flow rate is too low | Bottom valve jam, jams, impeller suction height is too high, packing wear. | Clear jam. Lower suction height, improve speed, change of packing. |
| 3,pump power consumption | The impeller wear, bearing damage. | Replacement. |
| 4,pump overall vibration. | Inappropriate fixed installation, damage of impeller, pump shaft bending. | Reinstall the fixed, replacement impeller, replace the spindle |
Â
1. Quick, efficient and professional response within 24 hours, 14 hours online services.
2. 10 years manufacturing experience in industrial field.
3. Technical support and solution by chief engineer.
4. Strict quality control system & team, high reputation in the market.
5. Full range of products for choice.
6. OEM services.
Contact usÂ
Company introduction
SHANGHAI CHOCH POWER EQUIPMENT CO.,LTD IS IN THE LAND SCRAPE SHORE OF EAST SEE OF CHINA----SALES DIVISION IN SHANGHAI, FACTORY IN WUXI CITY, IT IS A KEY BASE IN PRODUCING KINDS OFÂ GENERATORS IN CHINA PRESENTLY, SPECIALIZED IN THE DEVELOPMENT, MANUFACTURING, IMPORTING AND DISTRIBUTION FOR GENERATING SETS UP TO 500 KVA, DIESEL ENGINES, DIESEL WATER PUMPSÂ ANDÂ HIGH PRESSURE WASHERS BOTH GASOLINE GENERATOR AND DIESEL GENERATOR POWERED.
CHOCH POWER HAS DEVELOPED A LARGE RANGE OF GENERATING SETS AND ENGINES,WATER PUMPS IN ORDER TO COVER ALL NEEDS FOR PROFESSIONAL AND CONSUMERS.
THE SHANGHAI COMPANY WAS FOUNDED IN 2016 , MANAGERIAL PHILOSOPHY OF COMPANY IS THAT "TAKE PERSON WITH ABILITY AS BASEMENT, DEVELOP AND TRY TO BE PRACTICAL, QUALITY FIRST, SERVICE INTENSIVE" AND THE SPIRIT OF ENTERPRISE THAT "HOLD TOGETHER AND INNOVATION, KEEP ON AGGRESSIVENESS, PURSUE SUPERIORITY", IT WILL MAKE THE COMPANY TO EXPLODE CONSTANTLY AND IS HAS PASSED ISO9001: 2000 QUALITY SYSTEM CERTIFICATION, CE.
Â
Thank you very much for viewing this page, and wish you a nice day!
Please click the button "Send" to contact us.
Â
A pneumatic tool, air tool, air-powered tool or pneumatic-powered tool is a type of power tool, driven by compressed air, supplied by an air compressor. Pneumatic tools can also be driven by compressed carbon dioxide (CO2) stored in small cylinders allowing for portability. Pneumatic tools are safer to run and maintain than their electric power tool equivalents, and have a higher power-to-weight ratio, allowing a smaller, lighter tool to accomplish the same task. General grade pneumatic tools with short life span are commonly cheaper and are also called disposable tools in tooling industries while industrial grade pneumatic tools with long life span are more expensive. In general, pneumatic tools are cheaper than the equivalent electric-powered tools.
Air tools were formerly unpopular in the DIY (Do it yourself) market, but are becoming increasingly popular, and have always been ubiquitous in industrial and manufacturing settings.
It is important to know some general specification technical terms used in pneumatic tools while it is also related to how to choose a good air compressor and if the tool can meet your job requirement so that an air tool can be used properly, respectively, Free Speed (rpm), Air Pressure(psi/bar), Air Consumption(cfm/scfm or m3/min), Horse Power(hp), spindle size...etc. Depending on different type of pneumatic tools, there are different specification values that you need to pay attention to.
Flow or airflow, related to air consumption in pneumatic tools, represents the quantity of compressed air that passes through a section over a unit of time. It is represented in l/min, m3, at the equivalent value in free air in conditions of standard reference atmosphere (SRA), i.e. +20 c, 65% of relative humidity, 1013 mbar, in accordance with norms NFE.
Pneumatic Tools,Pneumatic Cylinder,Pneumatic Fitting,Pressure Gauge
Changzhou Edaweld Trading Company Limited , https://www.edaweld.com