Dump truck's correct operation method

    It is generally known that a dump truck is a particularly large-scale vehicle that is particularly easy to operate. Its main workman is required to cooperate with an excavator to perform large-scale engineering operations. Although the dump truck looks simple to operate, there are still many people in the dump truck. The lack of attention to detail has caused some operational problems, resulting in the vehicle not working properly. In order to enable everyone to drive the dump truck safely and correctly, the following five points need attention:

    自卸车的正确操作方法_副本1.jpg

    The first point, we all know dump trucks are generally used diesel engine engine operation, etc. After the diesel tank is full, first run the engine for a while, wait until the water temperature reaches 45 degrees before driving.

    The second point: Before the dump truck is to be driven, we must first observe whether the operation of the dump truck has been disconnected. After confirming that the road conditions are normal, the lights will be started. Then hang the low gear. Finally, after looking through the reversing mirror to see the surroundings and the rear of the car without any conditions, we can safely hang the second or third gear according to our own situation.

    The third point: During the entire journey of the dump truck, we must choose the right gear according to the road conditions and the weight of the goods in the car, and we must choose the right gear, not too fast, not slow, and based on the stability. To avoid the mechanical damage caused by the load rotation of the engine when the vehicle speed is not uniform.

    自卸车的正确操作方法1_副本.jpg

    The fourth point: Everyone knows that the dump truck must be based on the amount of load carried by the dump truck itself when loading cargo. It must not be too heavy or too light, so as to avoid causing the steel plate or axle in the machinery to go under bad conditions. Damaged

    The fifth point: During our unloading of dump trucks, the on-site staff must always pay attention to the correct direction of the container and avoid deviation from the skewed box. When the direction is deviated, the container should be immediately dropped.

    The above is about five important operation methods of the dump truck in the operation process. We hope that the owners can understand the rules of use of the dump truck. It is recommended that everyone should go to the relevant driving organization to practice the hand before driving the dump truck to ensure that the future work Smooth progress.


    Roller Presser Foot Bar JUKI

    sewshimano , https://www.nb-fzysewing.com

    Previous Post: Digital LCD Tire Pressure Gauge
    Next Post: · Li Xiaopeng is the Minister of Communications, the network of the new car has a move?
    Home
    Recent Posts
    • What are the power cable fault point test method…
    • International giant Huntsman announces increase …
    • What is the role of water truck
    • Discussion on the research of new gear damping d…
    • Changsha Zoomlion's new generation concrete …
    • Test results of bacterial leaching with an enlar…
    • Method for preventing scaling in heap leaching
    • Dust fan hard surface technology
    • In the second half of the year, Eaton will launc…
    • How to customize the parking system according to…
    • "Greenhousekeeper" tube shed is easy a…
    • Problems and Solutions in the Production of Powe…
    • Vigorously cultivate new professional farmers to…
    • Application of vacuum assisted grouting process …
    • Loss of parts and components dispute: lost face …
    • at-Iiid Best Metal Detector 12 Zones Walk Throug…
    • Tianlong Optoelectronics expects to continue to …
    • Tianlong Optoelectronics expects to continue to …
    • **The necessity of establishing a clock system
    • Explosion proof analysis cabin technical descrip…