- Model NO.: RAY-FTIR200
- Warranty: > 1Year
- Advantage: High Sensitive
- Wavelengths: Infrared Spectrometer
- Light Number: Monochromator
- Customized: Customized
- G.Weght: 24kg
- Transport Package: Wooden Box
- Origin: Shanghai, China
- Application: Laboratory Apparatus
- Detection Method: Spectrophotometer
- Principle: New Spectrometer
- Dispersive Element: Interferometer Spectrometer
- Certification: RoHS, ISO9001, CE
- Size: W59xd39xh19 Cm
- Trademark: RAYLABEL or OEM
- Specification: ISO9001 and CE
Wavelength range, IR: 7000 to 400 cm-1
Wavelength range, NIR: 14000-5800 or to 9000 - 3850 cm-1
Resolution, standard: 1 cm-1
Resolution, option: 0.5 cm-1
Interferometer: Pendulum roof mirror type
Beam diameter: 30 mm.
Aperture ratio: F 3.2
Beamsplitter, standard IR: Multicoated KBr
Beamsplitter, option: Multicoated ZnSe
Beamsplitter, standard NIR: Fused Silica
Frequency reference: VCSEL laser
Emission port: Option
Sample compartment: W20xD26xH16 cm
Beam at sample: 10 mm dia.
Accessories: Ordinary FTIR accessories
IR source: High intensity air cooled ceramic
NIR source: Quartz-halogen lamp
Detector, IR Standard: Low noise DLATGS
Detector, IR Option: MCT
Detector, NIR: Si, InGaAs photodiode
Data acquisition system: 18 bit, high speed
Purge possibility: Yes
Operating system: Windows based
Interface: USB 2.0
Power: 12VDC, 30 W
Dimensions: W59xD39xH19 cm
Weight: 24 kg
Temp. Environment: 15 - 28 0C
Humidity environment: Best below 65%
Product Description
The Interspec RAY-FTIR200 series of FTIR spectrometers represent a low cost Fourier transform infrared spectrometers and employ a number of unique features that ensure high performance from a compact instrument. The Interspec RAY-FTIR200 measures just 59 X 39 X 19 cm and is regarded as one of compact and versatile infrared FTIR spectrophotometers. The design of the RAY-FTIR200 is unique both in terms of optical design and the software and firmware designed specifically to significantly reduce overall analytical times. The interferometer geometry is employing a new compact Michelson self compensating optical system that eliminates many of the optical alignment problems found in conventional type optical interferometers. The Interspec RAY-FTIR200 design avoids the use of conventional corner cube optics and dynamic alignment. In practice this means that the instrument can be used in the research laboratory, in any university or college environment and if required, can also be used outside laboratory or in remote locations.
Interferometer Performance
All Interspec FTIR instruments offer high S: N ratios and can provide SNR up to 15000: 1. Resolution in the infrared is available 1 cm-1 and programmable up to 32 cm-1 (option 0.5 cm-1). The overall wavelength range is 7000 to 400cm-1 (IR) or 14000 to 3000 cm-1 (NIR).
The Sample Compartment
As you will see the sample compartment is large indeed and can accommodate all of the normal sample handling requirements relating to FTIR spectroscopy. This unique compartment will also accommodate the wide range of accessories supplied by specialist accessory manufacturers. Overall dimensions are W20 X D26 X H16 cm. The optical axis is 74.5 mm above the base of the sample compartment and there is free space of 90 mm above the optical axis to the underside of the lid.
Extending Wavelength Ranges
In order to facilitate the use of more than one beam splitter or detector, provision has been made to interchange the beam splitter and detector assemblies allowing the Interspec RAY-FTIR200 to be used at any wavelength from 14000 to 400 cm-1.
Beam SplittersRange subject to coatings
KBr7000 to 400 cm-1
ZnSe5000 to 600 cm-1
Fused silica14000 to 3000 cm-1
Detector Options
The standard detector is a selected high sensitivity DLATGS pyroelectric design providing the highest possible signal to noise for all but the most demanding applications. However there are many applications in infrared spectroscopy where high resolution analysis is required for materials with high absorption characteristics and for these applications cryogenically cooled MCT detector options are available each with a specific wavelength range. In case of NIR spectral region two types of photodiodes are available: Si and InGaAs.
Single Head Chamfering Machine
- Designed both inside and outside of the tube and rod end, chamfering and face milling can be done once a uniform, rapid and accurate.
- This Pipe Chamfering Machine has semi-automatic Type: artificial feed, automatic cutter speed of advance and retreat quickly, to replace parts of different sizes just to make a simple adjustment.
- The metal pipe chamfering machine: cam synchronized feed, processing, high stability, can be done simultaneously on both sides, interior angle, exterior angle and the milling face at one time, can achieve a multiple increase in output.
- Gear chamfering machine can be appled to the material: stainless steel, iron, copper, aluminum tubing and bar.
Single End Chamfering Machine,Pneumatic Tube Chamfering Machine,Pipe Chamfering,Single Head Pipe Chamfering Head
GUANGDONG CHITTAK INTELLIGENT EQUIPMENT CO.,LTD , https://www.ctklasercutter.com