1. The operation is simple, and the "fool-style" one-click electroplating ultrapure water equipment is installed and debugged. There is no need to debug again, and complicated button switches and other operations are eliminated. The switch can be completed by only one key on the panel.
2. Fully automatic operation to realize automatic operation, automatic protection and automatic online monitoring of unmanned operation system equipment. At the same time, the system can realize manual and automatic switching. In the very running state, the equipment, water pump, control valve, etc. can be manually operated.
3. Purified water equipment self-protection function, pure water tank level protection function: if the pure water in the pure water tank exceeds the high level, the reverse osmosis purified water equipment for liquor blending must replace the membrane module 3. Food factory ingredient water pure water equipment, It is necessary for the operator to make a good record of installing a low-pressure pressure switch at the inlet of the high-pressure pump. When the inlet pressure of the pump is lower than 0.05, the pressure controller will act to stop the equipment and ensure the safety of the high-pressure pump.
A slow-opening electric valve and a high-pressure pressure switch are installed at the outlet of each group of high-pressure pumps. When the outlet pressure is higher than 2.0Mpa, is it good to drink pure water for a long time? The pressure controller can give people a sense of weight as a whole. Action to stop the equipment and ensure the safety of the high-pressure pump, membrane module and membrane housing.
4. The purified water equipment monitors various operating parameters in real time, and it is clear at a glance that the reverse osmosis main inlet pipe is equipped with an online conductivity meter to detect the quality of the raw water;
Set up a fresh water flow meter and a concentrated water flow meter on the reverse osmosis device, observe the operating status of reverse osmosis according to the two flow values, and adjust the system recovery rate;
Winnerlifting are manufactured Webbing Slings and Round Slings.Webbing Slings in accordance with DIN-EN 1492-1 standard. Round Sling manufactured in accordance with DIN-EN 1492-2standard. And the essential requirements of the European Machinery Directive.Color coded and striped for WLL(Working Load Limit) identification. Every single webbing sling and round sling is labeled and certificated in accordance with the relevant Standard together with information about safety use and maintenance.
Webbing Sling & Round Sling,Webbing Sling,Lifting Slings,Endless Round Sling
WINNERLIFTING SAFETY EQUIPMENT CO., LTD. , https://www.cargostrapfactory.com