HZS-04-9A speed transmitter
HZS series speed monitoring protector
Monitoring range: 0~100000rpm Accuracy: 0.1‰ Working power supply: +24VDC Input: One-way eddy current or magnetoelectric sensor Signal output: 4~20mA (isolation), OK indicator Installation method: The guide rail is an intelligent speed change using the single-chip microcomputer as the core Sender. The transmitter has: speed monitoring, dual alarm set point, analog current output and other functions. It is suitable for the monitoring and protection of rotating machinery speeds in electric power, petroleum, chemical and other industrial sectors, such as turbines, fans, compressors, motors, and pumps.
Technical Parameters:
External power supply: 220V AC or 24V DC
Input signal: Accepts magnetoresistive sensor or integrated eddy current sensor signal
Range: 0 to 50000rpm
LED indication: OK (normal) green, Alert, Danger (alarm, danger) red
Measurement error: ±0.1% of full scale
Current output: 4 ~ 20mA active, output load ≤ 500Ω
Ip22001 (1).jpg Alarm point setting: Users need to specify when ordering
Alarm reset method: manual (site reset button, remote alarm reset terminal)
Relay Seal: Epoxy resin, node capacity DC30V/5A or 220V/5A, single pole double throw
Power-up delay: about 10 seconds
Temperature range: During exercise -25°C～+65°C When storing? 40°C～+85°C
Relative humidity: up to 95%, non-condensing speed monitor, coupled with magnetoresistive sensors, eddy current sensors, hall sensors to monitor the unit speed. The micro-processing chip is used to process the signal, the measurement is accurate, the performance is stable, and the function can be extended according to the needs of the user. Rotary machinery, especially steam turbines, with sudden speed spikes is one of the most dangerous situations that can have disastrous consequences. It is extremely important that the unit can quickly and easily pass critical speeds when the unit is started or stopped. It is of great importance to monitor and protect the rotational speed of rotating machinery in electric power, petroleum and chemical industries. The device is highly intelligent, enabling full-scale board operation, suitable for long-term on-line monitoring, and without on-site maintenance.
The main function
Turbine, turbine, compressor, blower and other rotating machinery shaft speed monitoring and protection.
Function Description:
1. With speed measurement display function, the maximum speed 99999 rev / min, five digital display.
2. The alarm function, when the measured speed exceeds any alarm set value, the corresponding alarm indicator on the front panel is on, and the switch signal is output at the rear panel to protect the monitored equipment.
3. The alarm value, number of teeth, and time can be set via the front panel keys.
4. It has storage function for overspeed events to prepare for queries.
5. Indication of sensor or input circuit faults.
6. With self-test function
7. With voltage and current output interface, it can be connected with computers, DCS, PLC systems, paperless recorders and other devices.
Technical Parameters:
1. Input signal: Magnetoresistive sensor, eddy current sensor, Hall sensor, sine wave or pulse input, input voltage RMS 0.3-20V
HZS series speed monitoring protector
Monitoring range: 0~100000rpm Accuracy: 0.1‰ Working power supply: +24VDC Input: One-way eddy current or magnetoelectric sensor Signal output: 4~20mA (isolation), OK indicator Installation method: The guide rail is an intelligent speed change using the single-chip microcomputer as the core Sender. The transmitter has: speed monitoring, dual alarm set point, analog current output and other functions. It is suitable for the monitoring and protection of rotating machinery speeds in electric power, petroleum, chemical and other industrial sectors, such as turbines, fans, compressors, motors, and pumps.
Technical Parameters:
External power supply: 220V AC or 24V DC
Input signal: Accepts magnetoresistive sensor or integrated eddy current sensor signal
Range: 0 to 50000rpm
LED indication: OK (normal) green, Alert, Danger (alarm, danger) red
Measurement error: ±0.1% of full scale
Current output: 4 ~ 20mA active, output load ≤ 500Ω
Ip22001 (1).jpg Alarm point setting: Users need to specify when ordering
Alarm reset method: manual (site reset button, remote alarm reset terminal)
Relay Seal: Epoxy resin, node capacity DC30V/5A or 220V/5A, single pole double throw
Power-up delay: about 10 seconds
Temperature range: During exercise -25°C～+65°C When storing? 40°C～+85°C
Relative humidity: up to 95%, non-condensing speed monitor, coupled with magnetoresistive sensors, eddy current sensors, hall sensors to monitor the unit speed. The micro-processing chip is used to process the signal, the measurement is accurate, the performance is stable, and the function can be extended according to the needs of the user. Rotary machinery, especially steam turbines, with sudden speed spikes is one of the most dangerous situations that can have disastrous consequences. It is extremely important that the unit can quickly and easily pass critical speeds when the unit is started or stopped. It is of great importance to monitor and protect the rotational speed of rotating machinery in electric power, petroleum and chemical industries. The device is highly intelligent, enabling full-scale board operation, suitable for long-term on-line monitoring, and without on-site maintenance.
The main function
Turbine, turbine, compressor, blower and other rotating machinery shaft speed monitoring and protection.
Function Description:
1. With speed measurement display function, the maximum speed 99999 rev / min, five digital display.
2. The alarm function, when the measured speed exceeds any alarm set value, the corresponding alarm indicator on the front panel is on, and the switch signal is output at the rear panel to protect the monitored equipment.
3. The alarm value, number of teeth, and time can be set via the front panel keys.
4. It has storage function for overspeed events to prepare for queries.
5. Indication of sensor or input circuit faults.
6. With self-test function
7. With voltage and current output interface, it can be connected with computers, DCS, PLC systems, paperless recorders and other devices.
Technical Parameters:
1. Input signal: Magnetoresistive sensor, eddy current sensor, Hall sensor, sine wave or pulse input, input voltage RMS 0.3-20V
Truck Overcenter Buckle Set is one of our best selling products. We have almost all the types in this area. From the materials, we have zinc plated steel material and also have standard 304 stainless steel material. From the types of the buckles, we have the standard normal one, simple one and newest one. From the hooks, we have curved hook, flat hook, J hook etc. From the strap color, we have normal black color, gray color, red color, yellow color etc. From the strap materials, we have PP material and PE material. Please just list your request, we will let you satisfied.
Truck Overcenter Buckle Set
Truck Overcenter Buckle Set,Over Center Buckle With Strap,Over Center Buckle With Hook,Tautliner Strap With Hook
Jiaxing Ganland Auto Parts Co., Ltd. , https://www.ganlandparts.com