The general industrial indicators for geological evaluation of refractory clay are shown in Table 1.
Mining technical conditions: the lowest recoverable thickness of ore (true thickness), underground mining 0.8~1.0m; open mining 0.5~0.8m; stone removal thickness 0.5~0.8m; open peeling ratio ≤15.
When the content of impurities in the clay ore is high, the following indicators can be referred to:
â‘ High High quality aluminum base Clay: in addition to the general requirements, and require K 2 O + Na 2 O < 1.5 ~ 2%, TiO 2 <4.5% ( manufactured by casting lower alumina products only or no load softening temperature requirements Use bricks).
2 High alkali hard clay: High alkali hard clay in some areas can also be used as refractory clay when other harmful components are low. The reference indicators are shown in Table 2.
Note: The total amount of ore impurities in the above grades should be <9%.
3 High- titanium refractory clay: In addition to the general industrial requirements, TiO 2 <15% (high alumina clay) and TiO2 ≤7.5% (hard clay) are required.
4 High- iron hard clay: In the area lacking hard clay, or the iron of hard clay exists in the form of tuberculous pyrite, pyrite, etc., if special bricks are used, the content of Fe 2 O 3 The requirement may be less than 5%; if the iron is present in a dispersed state and is chemically treated, Fe 2 O 3 may require <14%.
EDAWELD Co., Ltd. Plasma Consumables Compatible for Trafimet.
Using Plasma Consumables cutting 4-30 mm steel plate is an ideal method, Avoid cutting oxygen B lack slow deformation, incision melted serious dross serious shortcomings.
Our Plasma Consumables are made by imported high-quality copper and use superb CNC technology. So they got bright surface and cutting speed, less wear and tear, as compared with the original parts, we can reach 90%. But our low prices, it is worth buying.
Plasma Consumables Compatible for Trafimet
Plasma Consumables Compatible for Trafimet,A141 Electrode and Nozzle, S75 Electrode and Nozzle,CB150 Electrode and Nozzle,S45 Electrode and Nozzle
EDAWELD COMPANY LIMITED , http://www.jsedaweld.com