1. The license plate should be installed without any deformation or punching, and it should be perpendicular to the ground. The error should be less than 15 degrees 2. The camera should be fixed on each side with two special seals for license plates issued by the issuing authority. The former number plate must be installed in the middle or right side of the front lower front part of the vehicle body. The rear number plate must be installed in the middle or left position of the front lower rear part of the vehicle body. 5. All production after October 1, 1992 All types of motor vehicles must be designed and manufactured in accordance with the above requirements and the size specifications of the number plate to manufacture corresponding mounting positions or number plate racks. 6. Large-sized trucks and trailers must be spurted to write the magnification number of the car number plate at the rear fence board. 2.5 times, the font standard is the same as the number plate. 7. The large truck trailer should have a trailer plate (a semi-trailer host plate), and spray the amplified number to issue a driving license. That is, the host and the trailer are not a number plate.
Dry Running Mechanical Seals,Dry Running Seals Cartridge,Mechanical Seals Dry Running Seals
Sichuan Zhongying Industrial Pump Co., Ltd , https://www.zygyb.com