Spiral classifier

    Spiral classifier are widely used in mineral processing plants grading operations, fine material may also be used after washing off the mud screening, dewatering operations. The device has the advantages of simple structure, reliable operation and convenient operation. It is not necessary to remove the grit sand when parking, and only the spiral can be raised, but the dewatering effect is not as good as the dewatering sieve.
    According to the difference in structure, the spiral classifier has single, double helix and high squat type and sunken type. When used for dewatering and dewatering, the appropriate type should be selected according to the size of the separated particle size: when used to remove coarser sludge, the low-lying spiral classifier can be used, which has small settlement area and low overflow. The coarse ore particles can also enter the overflow; when the separation particle size is greater than 0.15 mm, the high-grade spiral classifier is used; when the fine-grain material below 0.15 mm is separated, the sinking spiral classifier is used.
    The capacity of the spiral classifier for dewatering and desliming is the same as that used as the classifying device .

    Helper have accumulated rich experience in the smoking(Smoking Chamber),dry maturing(Dry Maturing Chamber) and cooking(Cooking Chamber) solutions through decades of years development. We know clearly the importance of the temperature, humidity and ventilation conrtrolling for sausage production, thus our machine can hold control all the key points and help our clients to avoid the risk of defective products. Not only the machine itself, we are always pleasure to give our suggestions on the auxiliary and some other supported devices and equipment.

    smoking solution for meat processing

    Smoking And Cooking Solutions

    Sausage Ham Smokehouse,Smoke Maturing Oven,Meat Processing Smoke Oven,Smoking And Cooking Solutions,Smoking Chamber,Cooking Chamber,Dry Maturing Chamber

    Shijiazhuang Helper Food Machinery Co., Ltd. , https://www.ihelpergroup.com

    Previous Post: Sulfide ore acid leaching - Concord process
    Next Post: New Technology of Copper and Molybdenum Separation in Dexing Copper Mine
    Home
    Recent Posts
    • Study on Beneficiation Process of Ilmenite in a …
    • Molybdenum ore oxidation and molybdenum ore in a…
    • General requirements for technical conditions fo…
    • Basic structure and working principle of externa…
    • Production of titanium dioxide by sulfuric acid …
    • Method for separating copper and sulfur in coppe…
    • Technology for preparing ferric sulfate by calci…
    • Darwin silver tailings granulation heap leaching…
    • Combination of collectors
    • Lithium, tantalum, niobium and tantalum ore indu…
    • Labor productivity
    • Non-ferrous metal processing product code repres…
    • Separation test between siderite and hematite
    • Pretreatment process for refractory ores and con…
    • Comprehensive utilization technology method and …
    • Several theoretical studies on copper oxide ore …
    • Production of Titanium Dioxide by Sulfuric Acid …
    • Anion reverse flotation process
    • Hydrotalcite introduction
    • Uniaxial compressive strength of rock and its de…