Recently, at the seminar on the development of new security standards for national anti-theft doors held in Wuxi, a number of experts from the Ministry of Public Security and the leading manufacturers of anti-theft doors in the country jointly revised the original standards for anti-theft door production. Security doors must be marked with a security level concave imprint in the upper left corner. Three new standards, such as security stamps, will be introduced next year.
In 1998, the State formulated the GB17565-1998 “General Technical Conditions for Anti-theft Security Doorsâ€, which required the selection of materials for anti-theft doors to meet the requirements of the standard, and clearly stated that the thickness of the door frame should reach 2.0 mm or more, and the location of the anti-theft door lock should be specified. The mandatory standards for the hinge part, the door leaf part, and the door frame part. The seminar revised the original national standard respectively, including 30 minutes, 15 minutes, 10 minutes and 6 minutes for the abnormal opening time of the security door; the length of the locking tongue is not less than 16 millimeters; the number of locking points Not less than 8 points and so on.
In response to the status quo of “security gates†and “entrance gates†on the anti-theft door market, the new standard requires that all security doors be marked with a security level in the upper left corner of the door from next year (A, B, C, D, and T) The characters of the security door are permanently fixed to the upper edge of the hinge in the form of Arial gravure, 1.60 meters above ground level, and 10 mm positive and negative errors.
According to reports, the standard will strive for full implementation in the first quarter of next year.
In 1998, the State formulated the GB17565-1998 “General Technical Conditions for Anti-theft Security Doorsâ€, which required the selection of materials for anti-theft doors to meet the requirements of the standard, and clearly stated that the thickness of the door frame should reach 2.0 mm or more, and the location of the anti-theft door lock should be specified. The mandatory standards for the hinge part, the door leaf part, and the door frame part. The seminar revised the original national standard respectively, including 30 minutes, 15 minutes, 10 minutes and 6 minutes for the abnormal opening time of the security door; the length of the locking tongue is not less than 16 millimeters; the number of locking points Not less than 8 points and so on.
In response to the status quo of “security gates†and “entrance gates†on the anti-theft door market, the new standard requires that all security doors be marked with a security level in the upper left corner of the door from next year (A, B, C, D, and T) The characters of the security door are permanently fixed to the upper edge of the hinge in the form of Arial gravure, 1.60 meters above ground level, and 10 mm positive and negative errors.
According to reports, the standard will strive for full implementation in the first quarter of next year.
Release Date: 2007/1/12 11:45:02
Foton Light Truck Spare Parts,Foton Spare Parts,Foton Truck Spare Parts,Foton Light Truck Spares
Jinane Baisheng International Trade Co.,Ltd , https://www.jnbisontruck.com