Twin Screw Extruder Recycling and Pelletizing Machine for Waste Pet Plastic

Twin Screw Extruder Recycling and Pelletizing Machine for Waste PET Plastic
 

Background

Recycled PET bottle flakes are produced from waste beverage bottles by steps of sorting/ crushing/ washing and drying etc. , therefore recycled PET bottles flakes can be produced at any place where beverage consumption can be occurred. As the main market of recycled PET bottle flakes importing, there are more than 10-13 million tons PET bottle flakes imported into China every year.
In year of 2017, environmental regulations in China gets more and more strict, waste plastics are completely forbidden to import into China, as part of waste plastics, recycled PET neither can be imported in any forms of bottles bales or flakes; Following the Chinese environmental regulations, recycled plastics can only be imported in the form of granules/chips, therefore, it is necessary to re-pelletize the recycled PET bottles flakes for PET bottle flakes recyclers.

Completely forbidden to import into China, as part of waste plastics, recycled PET neither can be imported in any forms of bottles bales or flakes; Following the Chinese environmental regulations, recycled plastics can only be imported in the form of granules/chips, therefore, it is necessary to re-pelletize the recycled PET bottles flakes for PET bottle flakes recyclers.

Processing concerns

• Avoid hydrolyzing during PET bottles flakes re-pelletizing process;
• Large displacement ventilating device required to realize minimum IV value reducing;
• Avoid or reduce yellowing effect during re-pelletizing process;
• Automatic pelletizing method requested to reduce the labor load and realize stable high output.

Recycled PET bottle flakes re-pelletizing flowchart from ACERETECH

Features of PET bottle flakes recycling and pelletizing system from ACERETECH

• Enough pre-drying time is required before the bottle flakes enter into re-pelletizing step, ACERETECH adopts either venting type compactor or lifting type drying hopper to pre-dry the flakes and remove the moisture from flakes, to avoid PET hydrolyzing during the re-pelletizing process;

 

• Combine the features of modular designed processing section and well degassing performance structure from twin screw extruder and automatic 3-level roots type vacuum pump set, limit vacuum degassing pressure can be guaranteed reaching -0.1MPa, to remove the volatiles from PET melts maximumly through degassing unit, so as to guarantee tiny IV value reducing ;

 

• Optimized process steps and specialized designed processing section of twin screw extruder, make the PET flakes continuously and efficiently  transforming from solid state into liquid state, to avoid yellowing effect which could be occurred because of dead angle or local high temperature;
• Strands pelletizing unit is the typical PET pelletizing method, the strands which come out from extruder's die section, will be manually hauled into the water trough to cool, then, water removed through the air knife device, cut by the rotary blades of pelletizer and form the granules/chips. This strands pelletizing way requests more labor and skilled operation behavior, is suitable to the capacity request below 600kg/h for PET flakes re-pelletizing;

• But regarding high capacity PET pelletizing job, strands pelletizing way is not suitable, automatic and reliable underwater pelletizing system is necessary to guarantee high output and automation performance.

 

Recycling machine factorys (ACERETECH)

Data

Advantage of our system
a. Water-cooling temperature controls for process section,to guarantee precise control of process temperature.

b.Strands pelletizing system set into the recycling system.

c. Arrangement for inspection, installation and testing work

d. Long-term service:We will charge the buyer cost price of spare parts beyond one year and provide long-term technical guide
 

Service and support
1.Overseas installation and training are available;

2.Machine warranty with spares in stocking and in-time delivery.

 

 

Twin Screw Extruder Recycling and Pelletizing Machine for Waste PET Plastic
 

Background

Recycled PET bottle flakes are produced from waste beverage bottles by steps of sorting/ crushing/ washing and drying etc. , therefore recycled PET bottles flakes can be produced at any place where beverage consumption can be occurred. As the main market of recycled PET bottle flakes importing, there are more than 10-13 million tons PET bottle flakes imported into China every year.
In year of 2017, environmental regulations in China gets more and more strict, waste plastics are completely forbidden to import into China, as part of waste plastics, recycled PET neither can be imported in any forms of bottles bales or flakes; Following the Chinese environmental regulations, recycled plastics can only be imported in the form of granules/chips, therefore, it is necessary to re-pelletize the recycled PET bottles flakes for PET bottle flakes recyclers.

Completely forbidden to import into China, as part of waste plastics, recycled PET neither can be imported in any forms of bottles bales or flakes; Following the Chinese environmental regulations, recycled plastics can only be imported in the form of granules/chips, therefore, it is necessary to re-pelletize the recycled PET bottles flakes for PET bottle flakes recyclers.

Processing concerns

• Avoid hydrolyzing during PET bottles flakes re-pelletizing process;
• Large displacement ventilating device required to realize minimum IV value reducing;
• Avoid or reduce yellowing effect during re-pelletizing process;
• Automatic pelletizing method requested to reduce the labor load and realize stable high output.

Recycled PET bottle flakes re-pelletizing flowchart from ACERETECH

Features of PET bottle flakes recycling and pelletizing system from ACERETECH

• Enough pre-drying time is required before the bottle flakes enter into re-pelletizing step, ACERETECH adopts either venting type compactor or lifting type drying hopper to pre-dry the flakes and remove the moisture from flakes, to avoid PET hydrolyzing during the re-pelletizing process;

 

• Combine the features of modular designed processing section and well degassing performance structure from twin screw extruder and automatic 3-level roots type vacuum pump set, limit vacuum degassing pressure can be guaranteed reaching -0.1MPa, to remove the volatiles from PET melts maximumly through degassing unit, so as to guarantee tiny IV value reducing ;

 

• Optimized process steps and specialized designed processing section of twin screw extruder, make the PET flakes continuously and efficiently  transforming from solid state into liquid state, to avoid yellowing effect which could be occurred because of dead angle or local high temperature;
• Strands pelletizing unit is the typical PET pelletizing method, the strands which come out from extruder's die section, will be manually hauled into the water trough to cool, then, water removed through the air knife device, cut by the rotary blades of pelletizer and form the granules/chips. This strands pelletizing way requests more labor and skilled operation behavior, is suitable to the capacity request below 600kg/h for PET flakes re-pelletizing;

• But regarding high capacity PET pelletizing job, strands pelletizing way is not suitable, automatic and reliable underwater pelletizing system is necessary to guarantee high output and automation performance.

 

Recycling machine factorys (ACERETECH)

Data

Advantage of our system
a. Water-cooling temperature controls for process section,to guarantee precise control of process temperature.

b.Strands pelletizing system set into the recycling system.

c. Arrangement for inspection, installation and testing work

d. Long-term service:We will charge the buyer cost price of spare parts beyond one year and provide long-term technical guide
 

Service and support
1.Overseas installation and training are available;

2.Machine warranty with spares in stocking and in-time delivery.

 

 

Agricultural Spare Part

Agricultural Spare Part,Disc Harrow,Mounted Disc Harrow,Agriculture Machinery Parts

Ningbo COMBINE Machinery Co., Ltd. , https://www.combine-harvester-parts.com