Sanitation big coffee show
Zoomlion has launched a large-scale product, the ZLJ5160TXS sweeping vehicle, which has various functions such as road cleaning, road cleaning, road cleaning, roadside and roadside stone surface scrubbing, spray dust reduction, and low pressure flushing.
Features
Environmental Environment
1. Fan noise reduction technology: Through simulation analysis, optimize the fan blades and design low noise fans. In addition to the spectral characteristics of the aerodynamic noise of the special fan, a special fan muffler is added to reduce the noise of the whole vehicle by 1-2 decibels.
2, power matching technology: optimize the engine speed and working conditions to match, so that the engine always works in the economic fuel consumption area, improve fuel economy.
High Efficiency
1. Ultra-high simulation nozzle technology: Through simulation analysis, optimize the gas flow field and structural design of the nozzle, and improve the suction capacity by 10%.
2, unique seesaw control structure: to ensure that the bulk of the garbage can be cleaned, improve the overall cleanliness rate.
3. Pipeline stabilization technology: The hydraulic pipeline adopts the international advanced ferrule type mechanical hard seal fine extraction pipe, which greatly reduces the failure rate of the hydraulic system.
Smart Intelligence
1. CAN bus intelligent control technology: realize one-button control, display the vehicle operating conditions, operating parameters, fault information, etc. through the screen in real time, and monitor and other video functions, so that the working status is clear at a glance, which is convenient for the driver to operate and maintain.
2, GPS real-time monitoring technology: through the communication with the management platform information, to achieve information sharing between the job site and the management center, so that the management center to grasp the vehicle operating status in real time.
3, cleaning mechanism adaptive technology: cleaning mechanism can adjust the height of the sweeping plate and the ground according to the sweeping wear and road surface conditions, further improve the cleanliness rate of the operation, effectively extend the service life of the brushing up to 15%; the cleaning mechanism can be self-stereoscopic Obstacle obstacles on the road surface can be automatically restored to normal operation after passing obstacles, which is not easy to damage and more reliable.
Detail
01. Clean the road along the stone, at the same time, wash the road along the stone facade and the road near the roadside, wash the stone along the top surface of the road, and collect the sewage and garbage, which can solve the roadside cleaning problem well. .
02. The right rear side of the sweeping car is equipped with a mechanical automatic winding and rolling reel, equipped with a 20m high-pressure hose, which can be used to clean the body and other places to be cleaned. Handheld stainless steel spray gun with quick coupling for easy connection or disconnection from the rinse reel. The hand-held spray gun has high cleaning efficiency, good effect and safe and convenient operation.
03. Set the spray bar at the rear of the car to spray dust.
04. When washing and cleaning, the pavement washing rate can reach 97%.
Product parameters
(This article is from Zoomlion)
European type impact crusher is mainly used in metallurgy, mining, cement, chemical industry, refractory materials, ceramics and other industrial sectors. It is widely used in highway construction, water conservancy engineering, construction crushed stone, machine-made sand processing and other fields, and is very suitable for crushing various soft and hard ores. Perform coarse, medium, and fine crushing operations.
This machine is a crushing machine developed using impact energy to crush materials. When the material enters the action zone of the plate hammer, it is crushed by the high-speed impact of the plate hammer and thrown towards the impact device installed above the rotor to break again. Then, it bounces back from the impact lining plate to the action zone of the plate hammer and breaks again. This process is repeated until the material is crushed to the required particle size and discharged from the lower part of the machine. Adjusting the gap between the counterattack frame and the rotor frame can achieve the goal of changing the particle size and shape of the material. This machine adopts a spring safety device behind the impact plate. When non broken objects enter the crushing chamber, the front and rear impact frames retreat, and the non-broken objects are discharged from the machine.
European Impact Crusher,Impact Crusher,Impact Rock Crusher
SiChuan TieYing Machinery Manufacturing CO.,LTD; , https://www.tieyingcrushers.com