1.2 GHz Wireless Camera 2.4 GHz Multi-Function Mini Version GPS Wireless Dual Mode Detector

Model NO.: VS-T6B
Material: ABS Plastic
Detecting The Dynamic Range: >73dB
Detection Sensitivity: ≤0.03MW
Trademark: vodasafe
Transport Package: Polyfoam and Carton
Specification: L11.6*W7*T3.3cm
Origin: Taiwan
HS Code: 9031809090
1.2 GHz Wireless Camera 2.4 GHz Multi-Function Mini Version GPS Wireless Dual Mode Detector

Dual Mode Detector Instructions
VS-T6B

The VS-T6B is a high-tech device developed in Germany, designed for detecting various types of bugs, car trackers, wireless pinhole cameras, mobile phone undercover software, and casino-related surveillance equipment. It meets the needs of military and police surveillance, as it can detect electrical sources, helping to protect you and your family from electromagnetic radiation. This detector uses a digital receiving mode, which offers two key advantages: it broadens the detection frequency range to avoid interference from everyday signals, and it enhances sensitivity, allowing users to easily locate even strong signals by adjusting the knob. As a result, the VS-T6B is considered one of the most advanced portable wireless signal detectors available on the market.

1.2 GHz Wireless Camera 2.4 GHz Multi-Function Mini Version GPS Wireless Dual Mode Detector
Panel & Function
*Handheld device. Top left is the antenna.
*Right side has the sensitivity adjustment knob. Clockwise increases sensitivity, counterclockwise decreases it.
*Middle section features a 10-level LED display. The window represents the GPS sensing area.
*The first indicator under the device shows charging status. It lights up when charging and turns off when fully charged.
*The lower circular button is the sleep detection power switch.
*The second indicator is for wireless power supply instructions.
*The third to tenth indicators are for detection purposes, showing signal strength from weak to strong.
*If all lights flash, an alarm sound will be triggered. The more intense the signal, the faster the beep.

Instructions
★Hibernation GPS Detection: Turn on the hibernation detection power switch. The power-on indicator lights up, and the device enters working mode. If GPS is detected, an alarm will sound.
★Turn on the wireless probe knob power switch. When the second LED lights up, the device is operating normally.
★Turn the knob clockwise to maximum to enter standby mode. If there's a stronger environmental signal, adjust the knob back so that the lights don't exceed the fifth level.
★When the signal is strong, a beep will sound. The stronger the signal, the faster the beep.
★When the light bars are bright and full, the sound becomes faster, indicating proximity to the target. Adjust the knob back if the signal is strong to help locate the object.
★Due to its high sensitivity, the device can pick up signals from mobile phone base stations and TV broadcasting towers. To find a car GPS, drive to an area with weak signal and set your phone to airplane mode for better detection.
★If no target is present in the room but the device still alarms, possible reasons could be:
1) Your own communication devices may automatically sync with the base station at certain times.
2) The target might be near the room, possibly in another room or someone else calling nearby.
3) Too close to a wireless router.
Main Features
*Professional radio detection device with high sensitivity, adjustable threshold, and wide frequency range.
*Easy to use (only a switch and sensitivity knob), with sound and light alarm indicators, accurate and reliable.
*Can detect mobile, unicom, telecom, 2G, 3G, 4G cards for bugs and location tracking.
*Can detect high-speed upload GPS locator packets.
*Can detect 1.2 G/2.4G wireless cameras.
*Can detect hidden 5.8 GHz wireless cameras and eavesdropping devices.
Technical Data
★Frequency Range: 1 MHz - 8000 MHz
★Detecting Dynamic Range: >73 dB
★Detection Sensitivity: ≤0.03 MW (main frequency)
Detection Range:
2.4 GHz wireless camera: 10 meters (standard 10 MW camera)
1.2 GHz wireless camera: 15 meters (standard 10 MW camera)
Mobile: 2G, 3G, 4G: 10 meters
★Indication: 9-level LED display / modulation sound indication
★Power: Built-in 3.7V lithium polymer battery
Battery
Working Current: 60 mA; Working Time: 10-15 hours
★Material: ABS plastic; Weight: 120g
Volume: 115x52x20mm
Applications
1. Check if your car or office has been installed with wireless bugs or tracking devices.
2. Determine if your cellphone is being eavesdropped on or acting abnormally (transmitting without reason while on standby).
3. Identify if there is any base station radiation around your workplace or home.
4. Detect SMS send/receive signals, mobile internet, and phone switching activity.
5. Monitor wireless network signals, mobile phone base stations, and wireless monitoring systems.
6. Assess whether household appliances like microwave ovens are leaking radiation and causing harm.
7. Identify any suspicious wireless signals in the environment.
8. Use in hotels, bathrooms, entertainment venues, locker rooms, and government offices.
9. Apply in business negotiations, school administrations, factories, and military facilities.
10. Detect radio wave interactions during mahjong games.
11. Use in mortgage cars, used car sales, pawnshops, guarantee companies, small-scale financial institutions, and information-based financial companies.

Please contact us at:
MS Rola
My phone: +86-13580038745

   
   

   

Super Artery Series Hose

Super Artery Series Hose,Flexible Steel Wire Hose,Steel Wire-braided Hose,SAE Wire Braided Hose

Luohe Letone Hydraulic Technology Co., Ltd , https://www.litonghose.com