Bafang Bbshd 48V 1000W MID Engine Kit

This mid motor kits include:
1* mid motor: 750w/1000w for option
1* C965 LCD display/ C961/dpc-14/850c/dpc-18 display for option
1*thumb throttle
1*speed sensor
1* chain wheel
2*cranks
2* brake levers
other nuts and wires

Contact
Susan Lu
Phone:86-18262988663
  
 



Packaging and Delivery
Packaging Details: standard package of electric bicycle
Delivery Time: 7-15days after payment


Our Company
We at CNEBIKES are a dedicated team with many years of combined experiences in the field of electric bicycles. Our product line covers various electric bikes, electric bike conversion kits, and relative parts for electric bicycles. 
We are located in Changzhou city ,Jiangsu ,China.  We are just one hour from Shanghai by high-speed train . 
Our factory is certified by CE, SGS, CCC, EEC and other related certifications. Our products are reliable and durable. We export to Europe, the USA, Canada, Southeast Asia, Australia and many other countries . At CNEBIKES we always pay close attention to good customerservice and a logical service.


FAQ:
Q: What is the electric bike conversion kit?
A: The kit is designed to transform your standard bicycle(manual pedal power)to an electric-powered by a motor and battery pack. 

Q: Will the conversion kit fit my bicycle?
A: The conversion was designed to fit 90% of the bicycles, and you can check your bicycle fork(the two metal pieces that attach the wheel to the bicycle) to be sure. You will need at least 100mm for front wheel and 135mm for rear wheel.

Q: If my bicycle meet your standard, how can I choose to install front wheel or rear wheel motor?
A: A front hub kit is normally much easier to install than a rear wheel kit since you don't have to worry about gearing or derailers. When riding, the rider can easily see the front wheel and respond quickly to problems such as wheel spinning.
Rear wheel drive has the advantage of better traction which is great for hills and inclines. And because the rear frame dropouts are normally stronger than the front fork dropouts, a rear wheel can handle more torque and increased power. 
 
Q: How fast will it go?
A: The speed would be decided by the motor power, controller and battery spec. According to different countries rules, we provide 25km/h for EU and AU market, provide 30km/h for other market.

Q: How far can I go on one charge?
This varies depending on usage, your specification will affect the your battery performance and life. And mostly of the battery have a cycle life of more than 700charges.

Q: Do I have to pedal to assist the motor?
A: There are two kinds of modes available, throttle controller and pedal assist.
Throttle controller means you use a throttle to control power and speed. To get started, simply twist the throttle to accelerate and hold it to maintain speed.
Pedal assist means once you start pedaling, a torque sensor picks up your movement and power integrates seamlessly while you ride. Just pedal and go. Once you use the brakes or quit pedaling, the power is deactivated and you need to pedal again (lightly) to re-activate pedal assistance.

Q: How long does it take to recharge the battery?
A: usually it takes 4-6 hours.

Q. When should I recharge batteries?
A. The battery can be charged after every ride. We do recommend that every 20th charge that you run the battery flat and give it a full charge.

Q: How should I store my battery?
A: Store in cool dry place, you should fully charge your battery before storing it.

Q: How can I get the best battery performance and range?
A: Pedal while the motor is on, start the motor after the bike is moving, use the motor mainly to climb hills, and don't use the motor while you are going downhill.








 



This mid motor kits include:
1* mid motor: 750w/1000w for option
1* C965 LCD display/ C961/dpc-14/850c/dpc-18 display for option
1*thumb throttle
1*speed sensor
1* chain wheel
2*cranks
2* brake levers
other nuts and wires

Contact
Susan Lu
Phone:86-18262988663
  
 



Packaging and Delivery
Packaging Details: standard package of electric bicycle
Delivery Time: 7-15days after payment


Our Company
We at CNEBIKES are a dedicated team with many years of combined experiences in the field of electric bicycles. Our product line covers various electric bikes, electric bike conversion kits, and relative parts for electric bicycles. 
We are located in Changzhou city ,Jiangsu ,China.  We are just one hour from Shanghai by high-speed train . 
Our factory is certified by CE, SGS, CCC, EEC and other related certifications. Our products are reliable and durable. We export to Europe, the USA, Canada, Southeast Asia, Australia and many other countries . At CNEBIKES we always pay close attention to good customerservice and a logical service.


FAQ:
Q: What is the electric bike conversion kit?
A: The kit is designed to transform your standard bicycle(manual pedal power)to an electric-powered by a motor and battery pack. 

Q: Will the conversion kit fit my bicycle?
A: The conversion was designed to fit 90% of the bicycles, and you can check your bicycle fork(the two metal pieces that attach the wheel to the bicycle) to be sure. You will need at least 100mm for front wheel and 135mm for rear wheel.

Q: If my bicycle meet your standard, how can I choose to install front wheel or rear wheel motor?
A: A front hub kit is normally much easier to install than a rear wheel kit since you don't have to worry about gearing or derailers. When riding, the rider can easily see the front wheel and respond quickly to problems such as wheel spinning.
Rear wheel drive has the advantage of better traction which is great for hills and inclines. And because the rear frame dropouts are normally stronger than the front fork dropouts, a rear wheel can handle more torque and increased power. 
 
Q: How fast will it go?
A: The speed would be decided by the motor power, controller and battery spec. According to different countries rules, we provide 25km/h for EU and AU market, provide 30km/h for other market.

Q: How far can I go on one charge?
This varies depending on usage, your specification will affect the your battery performance and life. And mostly of the battery have a cycle life of more than 700charges.

Q: Do I have to pedal to assist the motor?
A: There are two kinds of modes available, throttle controller and pedal assist.
Throttle controller means you use a throttle to control power and speed. To get started, simply twist the throttle to accelerate and hold it to maintain speed.
Pedal assist means once you start pedaling, a torque sensor picks up your movement and power integrates seamlessly while you ride. Just pedal and go. Once you use the brakes or quit pedaling, the power is deactivated and you need to pedal again (lightly) to re-activate pedal assistance.

Q: How long does it take to recharge the battery?
A: usually it takes 4-6 hours.

Q. When should I recharge batteries?
A. The battery can be charged after every ride. We do recommend that every 20th charge that you run the battery flat and give it a full charge.

Q: How should I store my battery?
A: Store in cool dry place, you should fully charge your battery before storing it.

Q: How can I get the best battery performance and range?
A: Pedal while the motor is on, start the motor after the bike is moving, use the motor mainly to climb hills, and don't use the motor while you are going downhill.








 

Confocal Laser Scanning Microscopy (CLSM) consists of confocal microscopy, Laser and data acquisition system. It is a combination of the optical microscope, the modern laser technology, Raman detection technology, scanning control technology, computer image processing technique and fluorescence labeling technique. Its application and research field include the observation of life living cell structure and specific molecular, Ion biological changes, pharmacology, genetics, spectroscopy and related subjects. Specific applications such as: stochastic optical reconstruction microscopy(STORM), fluorescence lifetime-transient scanning(FLITS), fluoresence recover after photobleaching(FRAP), stimulated emission depletion(STED)etc.

Changchun New Industries (CNI), founded in 1996, is a leading manufacturer of solid-state and Diode Laser systems. CNI laser features with high performance, nice reliability, and specifically designed for OEM, scientific, industrial and instrumentation use. In addition, CNI lasers are ISO-9001, FDA, CE, RoHS and JQA certified. CNI can provide different lasers for Confocal Laser Scanning Microscopy, High Resolution Fiber Optic Spectrometer, Optical Fiber Raman Probe, Fiber Coupler, modulator and other related accessories.

Features

â–  CNI self-developed high reliability lasers. User requirements can be realized.

â–  CNI can provide different lasers with free space and Multi-wavelength single-mode fiber coupling, and related

accessories. 
â–  System is stable and reliable. Customized solution can be provided upon request.

Laser Related

 Wavelengths: 266nm, 355 nm, 360 nm, 375 nm, 405 nm, 442 nm, 445 nm, 457 nm, 465 nm, 473 nm, 488 nm, 515 nm, 

                        520 nm, 532 nm, 556 nm, 561 nm, 589 nm, 593 nm, 633 nm, 637 nm.640 nm, 671 nm., 690 nm, 720 nm,

                        750 nm, 785 nm, 808 nm, 1064 nm, 2200 nm etc. 

                        Single longitudinal mode, narrow linewidth,  laser available; Multi-wavelengths laser systems also available; New laser-wavelength can be customized.

Accessories

Fiber Patech Cables	Spectrometer	Raman Probe	Power Meter	Laser Goggles

Applications of CNI laser for Confocal Laser Scanning Microscopy

(1) Antimicrobial Photodynamic Efficiency of Novel Cationic Porphyrins towards Periodontal Gram-positive and Gram-negative Pathogenic Bacteria

    (Photochemistry and Photobiology, Volume 90, Issue 3, pages 628–640, May/June 2014) (CNI-635nm)

(2) Calcium Dynamics in Root Cells of Arabidopsis thaliana Visualized with Selective Plane Illumination Microscopy (PloS one, 2013, 8(10): e75646.)         (CNI-442nm)

(3) Fluoxetine induces vasodilatation of cerebral arterioles by co-modulating NO/muscarinic signalling (Journal of Cellular and Molecular Medicine,              Volume 16, Issue 11, pages 2736–2744, November 2012) (CNI-532nm)

(4) Fluorescence ghost imaging with pseudothermal light (Optics Letters, Vol. 36, Issue 16, pp. 3302-3304 (2011)) (CNI-473nm)

(5) Improved Temporal Resolution and Linked Hidden Markov Modeling for Switchable Single-Molecule FRE (ChemPhysChem, Volume 12, Issue              3, pages 571–579,February 25, 2011) (CNI-532nm)

(6) Near-field Raman imaging using optically trapped dielectric microsphere (Optics Express, Vol. 16, Issue 11, pp. 7976-7984 (2008)) (CNI-532nm)

(7) Ultra-high resolution Raman imaging by optically trapped dielectric microsphere (NanoScience+ Engineering. International Society for Optics and           Photonics, 2008: 70330E-70330E-7) (CNI-532nm)

(8) Luminescence enhancement in nanocomposite consisting of polyvinyl alcohol incorporated gold nanoparticles and Nile blue 690 perchlorate  

    (Applied Optics, Vol. 53, Issue 31, pp. 7177-7181 (2014)) (CNI-532nm)

Confocal Laser Scanning Microscopy

Laser for Confocal Scanning Microscopy,Green Laser for Microscopy,Laser Microscope,Laser Scanning Microscope

Changchun New Industries Optoelectronics Technology Co., Ltd. , https://www.lasersciences.com