Model NO.: LXSZ-15/20/25
Work Environment: Wet Water Meter
Demention: 165X85X111mm
Working Pressure: ≤1MPa
Pressure Loss: ≤0.1MPa
Central Frequency: 470MHz
Battery: 3.6V/3.3A/H Disposable Lithium Battery
Modulation: Fsk
Bandwidth: 64kHz
Power Consumption: 30ua
Transmit Power: 50MW
Transmit Distance: >200m (Open Field)
Trademark: Minsen
Transport Package: Carton
Origin: Liaoning, China
HS Code: 90282010
Â
Structure and Working Theory
Â
      Inside the counter of water meter (mechanical part), there is one magnet embedded under the wheel pointer for 0.01 m3 of water and two reed switches beside each side of the wheel. Each time the pointer goes a circle, one group of two pulses is generated to represent 0.01 m3 of water being calculated. The pulses are converted to digital signals and recorded as metering data based on pre-set program. Then the metering data can be transmitted to a concentrator or hand-held unit.
Â
 Product Features
Mainly applicable to new construction projects, or reconstruction projects for old residential area which are inconvenient for wiring deployment.
Wireless transmission technology is applied to realize out-door meter reading, which simplified system installation by avoiding wiring deployment.
The wireless transmission distance for hand-held unit is over 200 meters in open field.
Friendly user interface for management software of background platform. Variety of formats for data output and customized link with billing system according to customers'needs.
Total volume calculation of water flowing across the pipe and wireless meter reading.
Remote valve-control to solve arrearage problem.
Three-level automatic routing to increase transmission distance.
Real-time meter reading to realize ladder-type pricing.
Fully anti-water design, functional under the water.
ERFCU design, ultra-low power consumption.
WOR remote awaking technology to reduce power consumption.
Wamr Net routing protocol to ensure data security.
High speed transmission, data reading for single meter within 1.5 seconds.
Simple and practical structure with removable battery.
Maximum Permissible Error
From minimum flux inclusive up to transitional flux: ±5%
From transitional flux up to maximum flux both inclusive: ±2% (cold water meter)
From transitional flux up to maximum flux both inclusive: ±3% (hot water meter)
Â
| Model | Nominal Diameter | Metering Grade | Common Flux | Transitional Flux | Minimum Flux | Minimum Reading | Maximum Reading |
| mm | Â | m 3 /h | m 3 | ||||
| LXSK-15(cold) | 15 | B | 1.5 | 0.12 | 0.03 | 0.0001 | 99999.999 |
| LXSK-20(cold) | 20 | B | 2.5 | 0.2 | 0.05 | 0.0001 | 99999.999 |
| LXSK-25(cold) | 25 | B | 3.5 | 0.28 | 0.07 | 0.0001 | 99999.999 |
| LXSFR-15(hot) | 15 | A | 1.5 | 0.15 | 0.06 | 0.0001 | 99999.999 |
| LXSFR-20(hot) | 20 | A | 2.5 | 0.25 | 0.10 | 0.0001 | 99999.999 |
| LXSFR-25(hot) | 25 | A | 3.5 | 0.35 | 0.14 | 0.0001 | 99999.999 |
Electric or pneumatic polisher has been widely used in industrial processing. It is installed in the end of Industrial Robot . Just it can not control the force flexibly. Our Force Control System, or Active Contact Flange, Constant Force Actuator can solve this problem very well. It can improve the polishing efficiency and optimize polishing effect very well.
Polisher
Electric polisher, pneumatic polisher, orbital polisher
DARU Technology (Suzhou) Co., Ltd. , https://www.daruacf.com