Driving Tips: Ingenious Driving on a Road with No Streetlights

    Driving a car in the city usually has street lights. It is not a problem. However, driving on roads with few street lights or street lights is really tiring. Take the following measures:

    Driving a car in the city usually has street lights. It is not a problem. However, driving on roads with few street lights or street lights is really tiring. Take the following measures:

    First, you can use the high beam when driving, switch to low-beam light 100 meters before the traffic, and then use the high beam light.

    2. There are yellow or white lane lines on the general roads. Pay more attention to the lane line at the front when driving at night. This will make it easier.

    Third, when the car, do not have to take care of the face to the car, you still look at the lane line in front of you, as long as driving in their own lane, the appropriate deceleration on the line. Generally speaking, drivers will approach the lights when they are in the car. They will not be very dazzling. Of course, some newcomers do not understand the use of high beam lights and low beam lights. They have always used high beam lights and some unreasonable drivers. It will always use high beam, which can only be further slowed down. You just need to pay attention to the road ahead in front of you. Don't worry.

    Fourth, the rainy days are more troublesome. The rain on the road will be reflective and the lane line cannot be clearly seen. At this time, it is best to follow the car, drive the low beam light to follow the front of the vehicle to drive more easily, not too far away from the car. If you don’t have a car to follow and only drive a little slower, there will always be some people with good driving skills that are ahead of you and you can follow the car. In addition, at night, the road surface after the rain is generally gray and black, bumps, mud pits, potholes are black, and the water is white.

    Others PE/PP/PPR pipe extrusion machine line

    Others PE/PP/PPR pipe extrusion machine line, PE Pipe Extrusion Line Machine, China Others PE/PP/PPR pipe extrusion machine line

    KERKE Extrusion Equipment Co.Ltd. , http://www.kerkeextrusion.com

    Previous Post: LED lighting plant factory technology development trend
    Next Post: Crack special aeronautic materials processing high-precision fine rolling components to achieve matching
    Home
    Recent Posts
    • Donghong Shipbuilding successfully built the fir…
    • Many manufacturers have joined the high-end ligh…
    • The emergence of new brands and the emergence of…
    • Qingdao Shuangrui's new generation of domest…
    • Dongfeng Commercial Vehicle Engine Factory has a…
    • High-voltage switch is any use of relay protecti…
    • Cement Rotary Kiln/Rotary Kiln Dryer/Rotary Kiln…
    • Light box provides the most suitable growth envi…
    • Dongfeng "Partnership" Fuqi unfinished
    • Hailanxin products are directly supplied to Liao…
    • Measures for wheel slippage while driving
    • A technical transformation project of China Nati…
    • Sartorius Group Launches Moisture Analyzer
    • Sprinkler structure introduction
    • What to do before and after the suction truck wo…
    • LED lighting market development three stages
    • Northeast's largest LED industry base will b…
    • Samsung LED will continue vertical industry inte…
    • 50 Xicinc Machines Yaqing Club Special Vehicles …
    • Intelligent and monitor the future development d…