1-1 OULI COMPANY
Established in 1997, Qingdao Ouli Machine Co., Ltd. is located in Huangdao District, the west coast of Qingdao City, Shandong Province, China.
Branches in Suzhou and Dalian were created in 2012 and 2015 respectively.
We specialize in designing, manufacturing, and maintaining rubber machinery.
Main products include:
Rubber mixing equipment / Rubber vulcanizing machine / Automatic and semi-automatic waste tire recycling equipment / Rubber calendaring machine / Rubber extruding equipment / Reclaimed rubber production line
Our machines have been exported to more than 20 countries such as America, Canada, Australia, Southeast Asia, Middle East, and Brazil.
We warmly welcome customers to visit our factory and appreciate technology discussions.
1-2 OULI workshopÂ
Â
2-1. Basic introduction for Crusher for rubber
Hook Debeader LSJ-1200
Structural features
Superior materials used in tire recycling machines are made of alloy welding with a hard, wear-resistant surface.
For safety, this machine has a protective frame that ensures safety during wire loop removal.
The motor and reducer are compactly designed for efficient operation.
The machine occupies an entire floor, making installation convenient.
Use: Pulling out wire loops from the mouth of waste tires.
2. Tire Cutter QDJ-1200
The basic principle is that the motor drives the hydraulic system and cylinder. The tire is locked, and two blades rotate between the tire and shear cylinder to cut it. The rotating blades form a shearing action, achieving the desired cutting effect.
Features:
This equipment offers good shearing performance, high speed, low energy consumption, small size, and ease of use due to the hydraulic system. It is safe and easy to operate.
Mechanical description: Tires larger than 800mm are typically cut into four pieces, with each piece measuring 200-500mm.
Notes for using tire cutter:
a. Regularly inspect the knives. If they become blunt, maintain them promptly. The service life is approximately 2-3 years.
b. Filter and change the oil in the hydraulic station regularly. Typically, filter once every one and a half years.
c. Wearing parts include rubber seals, which are provided with another set when the machine is shipped to the buyer.
3&4. Whole tire shredder ZPS-900
Use:
This machine can directly crush tires smaller than 800mm. At normal temperature, it can crush them into 50×50 mm blocks, which can then be further processed into 10-30 mesh or separated into wires and fibers.
Features:
This machine has a compact structure, advanced technology, low energy consumption, high efficiency, and is easy to maintain. It uses carbide surfacing technology for tools, offering high hardness and wear resistance, allowing for repeated repairs and a longer service life. The rotary screen has a steel mesh lattice structure, enabling effective screening of qualified rubber. After processing large tires, the same effect can be achieved.
Mechanical description: Tires with a diameter of 800mm and rubber rings can be directly broken into 50×50 mm rubber blocks.
Notes for using whole tire shredder:
a. Inject gear oil into the gearbox (hypoid gear oil), and main bearings are lubricated with calcium-based grease. Three months after the machine's operation, the oil should be replaced and the fuel tank cleaned. From then on, change the oil once a year.
b. After processing 3,000 tons of waste rubber (under normal conditions), the buyer should grind the blade edge once. Blades are wear parts, with an average service life of 5-6 years. When delivering the machine to the buyer, the shredder will come equipped with edge hardness layer patching material (electrodes).
5. Double Rolls Rubber Crusher XKP-560
Use: Mainly used for breaking large rubber blocks into 40-50mm small rubber blocks.
Technical parameters:
Structure: The rollers are made of alloy cold-hard cast iron, providing wear resistance and durability. The mill flour has teeth and deep grooves.
To extend the service life of the cracker, we recommend building a foundation for the rubber cracker.
The configurations of our XKP-560 rubber cracker include nylon bush grease lubrication and hard gear surface reducers, which offer lower noise and longer service life.
Our crackers are designed with user-friendly operating platforms, and all wires are well connected from the control system to the motor. When using the machine, customers just need to connect it directly to the power.
2-2. Features for Crusher for rubber
Â
2-3. Parameter for Crusher for rubber
Â
| Â | Single hook Tire wire drawing machine | Â | Double hook Tire wire drawing machine | Â | ||||
| Â | Capacity (tires/h) | Â | 40-60 | Â | Capacity (tires/h) | Â | 60-120 | Â |
|  | Adapt tire size (mm) |  | ≤ 1200 |  | Adapt tire size (mm) |  | ≤ 1200 |  |
| Â | Powder (kw) | Â | 11 | Â | Powder (kw) | Â | 15 | Â |
| Â | Pulling force (T) | Â | 15 | Â | Pulling force (T) | Â | 30 | Â |
|  | Size (mm) |  | 3890×1850×3640 |  | Size (mm) |  | 2250×1650×1500 |  |
| Â | Weight (T) | Â | 2.8 | Â | Weight (T) | Â | 6 | Â |
| Â Â Tire Cutting machine | |
| Â Â Parameter/model | TC-300 |
| Â Capacity (tires/h) | 40-60 |
|   Adapt tire size (mm) | ≤ 1200 |
| Â Powder (kw) | 5.5 |
|  Size (mm) | 2010×1090×1700 |
| Â Â Weight (T) | 1.2 |
| Â Â Tire shredder | ||
| Â Parameter/model | ZPS-900 | ZPS-1200 |
|  Adopt tire (mm) | ≤ 900 | ≤ 1200 |
|  Output block size (mm) | 50×50 | 50×50 |
|  Power (kw) | 22×2 | 55×2 |
|  Capacity (kg/h) | 1500-2000 | 3000  |
|  Size (mm) | 3800×2030×3300 | 4100×2730×3300 |
| Â Weight (kg) | 6000 | 16000 |
Â
|  Rubber crusher machine | |||
| Parameter/model | XKP-400 | XKP-450 | XKP-560 |
| Front Roll diameter(mm) | 400 | 450 | 560 |
| Back Roll diameter (mm) | 400 | 450 | 510 |
| Roll working length(mm) | 600 | 800 | 800 |
| Roll ratio | 1:1.237 | 1:1.38 | 1:1.3 |
| Front roll speed (m/min) | 17.32 | 23.2 | 25.6 |
| Adjusting nip range(mm) | 0-10 | 0-10 | 0-15 |
| Motor power (kw) | 37 | 55 | 110 |
| Overall dimensions (mm) | 3950×1800×1780 | 4770×1846×1835 | 4750×2300×2000 |
| Weight (t) | 8 | 12 | 20 |
2-4. Sample picturesÂ
3. CUSTOMER FEEDBACK
4. EXHIBITION
5. PACKAGE AND DELIVERY
6. FAQ
Â
Q1:Why choose Us?
1.More than 20 years history of OULI MACHINE factory.
6-8 years foreign sales experience staff, more efficient and professional.
Engineers overseas service more than 20 countries.
2.ISO:9001, CE, BV certification approval.
3.Service timely, promise to give solution within 12 hours, guarantee customer trouble-free.
PBL (Polybutylene terephthalate laminate) plastic tube packaging is a type of packaging that is commonly used in the cosmetics and personal care industries. It consists of a laminate of polybutylene terephthalate (PBT) and aluminum foil, which provides a high barrier to moisture, oxygen, and light. The PBT layer also provides a high level of chemical resistance, making it suitable for a wide range of products.
PBL plastic tube packaging is available in a variety of sizes and shapes, and can be customized with different colors, finishes, and printing options. It is typically used to package products such as creams, lotions, gels, and serums.
Some of the benefits of PBL plastic tube packaging include:
1. High barrier properties: PBL plastic tube packaging provides a high level of protection against moisture, oxygen, and light, which helps to preserve the quality and shelf life of the product.
2. Chemical resistance: The PBT layer in PBL plastic tube packaging provides a high level of chemical resistance, making it suitable for a wide range of products.
3. Customization options: PBL plastic tube packaging can be customized with different colors, finishes, and printing options, allowing brands to create a unique and eye-catching design.
4. Convenience: PBL plastic tube packaging is lightweight and easy to use, making it a convenient option for consumers.
Overall, PBL plastic tube packaging is a versatile and effective packaging option for a wide range of products in the cosmetics and personal care industries.
Pbl Tube,Pbl Plastic Tube,Pbl Cosmetic Tube,Pbl Laminated Tubes
Suzhou Sanxin Tube Co.,Ltd. , https://www.packagingest.com