Filter press pump installation to pay attention to what problems do

    Filter press pump installation points:

    1. The import and export of pumps should be installed valves and rubber seismic section (pipe compensator) to facilitate overhaul.

    2. In the pump installation order, first install the import and export pipelines, and then the anchor bolts to prevent the connecting pipe when the pump tensile stress, damage to the pump.

    3. The outlet pipe is long or the filter press pump is installed at a high position. A check valve should be installed at the outlet of the pump to prevent the high pressure water hammer at outlet from destroying the pump and reversing the impeller caused by the backflow.

    4. Pump import and export pipeline configuration: In order to reduce the flow resistance of the pipeline and improve the pipeline transmission efficiency, pump inlet and outlet diameter should be greater than the pump inlet and outlet diameter.

    5. In order to more intuitively see the operation of the pump, the pressure gauge should be installed at the outlet of the pump, located on the straight line between the first valve of the pump outlet and the outlet of the pump.

    6. Pump inlet and outlet piping should be set up gravity support system, the pump can not afford the weight of the pipeline.

    7. Return pipe settings: filter press pump in normal working condition, when the pump reaches a certain pressure, the flow is less than 30% of the rated flow, you must open the return valve on the valve for shunt, so that both can stabilize the filter press Within the pressure, but also to ensure that the material inside the pump always maintain a certain moisture content of the liquid state. Otherwise, the pressure in the filter press is decreased, and the material in the pump cavity will be dried under the action of centrifugal force due to the pressure in the pump cavity, which increases the friction between the material and the pump and shortens the service life of the pump.

    【Print】 【Close】

    Car Covers

    Car Covers,Car Body Cover,Car Cover Outdoor Waterproof,Proof Dust Cover,Car Cover Outdoor,Car Cover Waterproof,Car Protection Cover

    Shaoxing Haoto Trading Co.,Ltd , https://www.hotooutdoor.com

    Previous Post: Wärtsilä was provided with a waterjet propeller for the newly built high speed ferry
    Next Post: Casting of 150t converter gear shaft
    Home
    Recent Posts
    • What are the power cable fault point test method…
    • International giant Huntsman announces increase …
    • What is the role of water truck
    • Discussion on the research of new gear damping d…
    • Changsha Zoomlion's new generation concrete …
    • Test results of bacterial leaching with an enlar…
    • Method for preventing scaling in heap leaching
    • Dust fan hard surface technology
    • In the second half of the year, Eaton will launc…
    • How to customize the parking system according to…
    • "Greenhousekeeper" tube shed is easy a…
    • Problems and Solutions in the Production of Powe…
    • Vigorously cultivate new professional farmers to…
    • Application of vacuum assisted grouting process …
    • Loss of parts and components dispute: lost face …
    • at-Iiid Best Metal Detector 12 Zones Walk Throug…
    • Tianlong Optoelectronics expects to continue to …
    • Tianlong Optoelectronics expects to continue to …
    • **The necessity of establishing a clock system
    • Explosion proof analysis cabin technical descrip…