As the issue of global greenhouse gas emissions is becoming more and more serious and approaching the critical point of self-regulation of the earth, countries have introduced relevant policies, and governments around the world, including China, must implement energy-saving emission reduction (CO2) without delay. LED lamps are currently the most energy-efficient. Green environmental protection electric light source has naturally become the main choice for lighting energy saving and emission reduction. With the gradual reduction of the cost and price of LED lamps, the popularity of the LED lamps is also accelerating. Before 2020, the market share of LED lamps will exceed 50.
Reducing the cost of LED lights LED chips occupy a major part of the cost of LED lights, so the main way to reduce the cost of LEDs is to reduce the cost of LED chips. The key to the development of LED chip technology lies in the substrate material and epitaxial growth technology. The base material is developed from traditional sapphire materials, silicon and silicon carbide to new materials such as zinc oxide and gallium nitride. In just a few years, LEDs have achieved great breakthroughs in light efficiency with a series of technological improvements including chip structure, surface roughening and multi-quantum well structure design.
The cost of silicon substrate is very low, and the technology is constantly improving. However, the current luminous efficiency is still not satisfactory. If this speed of development is maintained, once the higher level is reached, the silicon substrate becomes the most important technical solution and the enterprise will also become an inevitable choice. Gain huge economic returns.
Improve the light effect of LED lights LED lamp technology development direction with five major factors to improve light efficiency can also start from increasing the proportion of effective light. The thin film chip technology can reduce the light output loss of each side, and the light above 97 is output from the front side by the reflective surface at the bottom, so that most of the light obtained by the electric energy conversion is effective light, which not only significantly improves the light efficiency of the LED, but also Created superior convenience for lens design. Thin film chip technology is the core technology in the production of super bright LED chips.
Increasing the color rendering of LED lamps In high-brightness white LEDs, a small portion of the blue light has a longer wavelength after Stokes shift. This is a good thing because it allows LED lamp manufacturers to use many different color phosphor layers to extend the emission spectrum and effectively increase the color rendering index (CRI) of the LED. High CRI obtained with phosphor white LEDs comes at a price because Stokes shifts cause white LEDs to be less efficient than monochromatic LEDs. However, for most lighting applications, it is preferred to use high CRI and slightly less efficient LED lights.
It is composed of automatic tape dispenser collection to which can provide different cutting actions to suit any production line and off-line requirements. KDW Automatic Tape Dispensers are applicable to all kinds of adhesive tapes , the non-stick tape, and double-sided tapes. Some of our models are also capable of cutting and distributing two rolls of adhesive tapes simultaneous.KDW Automatic Tape Dispensers are programmable and easy to use. For more information about KDW Automatic Tape Dispensers, Please contact us or you can also visit our official website to see our product catalogs.
Tape Dispenser,Electric Tape Dispenser,Durable Auto Tape Dispenser,Accurate Electric Tape Dispenser
ShenZhen KDW Electronics Co.,Ltd , https://www.smtsplicetape.com