Knowledge of daily maintenance of powder material vehicles:
1. Powder material vehicle chassis: According to the instruction manual of the selected car chassis.
2. Air compressor: According to the specification of the air compressor.
3, power take-off: often pay attention to regular inspection of its lubrication conditions, operating conditions, if any abnormal noise should be identified and promptly ruled out its cause, should check once a year gear bite and wear, can not be over-speed operation.
4. Air circuit: The sealing condition should be checked frequently. If any air leakage occurs, remove it in time. Regularly check the working condition of each valve. If it fails, it should be repaired or replaced. The safety valve must be opened when the pressure is 0.2Mpa, and the pressure in the tank must not be increased. More than 0.2Mpa.
5. Tank: Regularly check the tank weld for air leakage. If this phenomenon is found, repair welding should be performed in time.
6, tank air chamber: often check the air chamber canvas, if moisture is not airtight or damaged, it should be replaced; check the air chamber pressure layer is compacted, if leakage phenomenon, will affect the discharge effect, should be promptly excluded.
Here are some precautions for daily operation steps of some common powder materials vehicles
1. Before each time the material inlet is opened, the pressure relief valve and air inlet ball valve must be opened to eliminate the excess air in the tank to avoid injury.
2, always pay attention to whether the pressure gauge is working properly, and prevent pressure gauges from malfunctioning and overpressure generating tanks.
3, often check the safety valve, to ensure pressure relief at 0.2Mpa, the tank body pressure shall not exceed 0.2Mpa.
4, often check the operation table is working properly, so as not to overrun and damage the air compressor and power take-off box.
5, always listen to the power box and air compressor rotation sound, if there is abnormal sound, should immediately stop troubleshooting.
Hubei Cheng Li Special Purpose Vehicle Co., Ltd., Sales Manager Chen Xin, Tel: Website: Welcome to visit us!
Fit cars All 12V series cars
Switch universal
Material Carbon fibre heated pads or alloy wire pads
Export More than 57500 sets per year
Supplied to China ChangChun FAW,etc
Certification ISO:9001:2015, GB/TS 16949:2009etc CE,ROHS
Strict test
passed
Passed 13 items strict test in US,such as knee load test,180-degree bending durability test,
powered endurance test, ingress egress test etc.
Failure rate <3‰ in 3 years
Warranty 2 years/24,000 km
Car seat heating, heated pads, heat seated for car, Carbon Fiber Seat Heated, 12v Heated Pads , Auto Seat Warmer, heating kit, Alloy Wire Heated Pads, Auto Seat Heated ,
Driving in a cold vehicle is never fun. But on a chilly day it takes some time for your engine heater to kick in, which means you have to live with the frigid conditions until the engine has a chance to warm up. Seat heaters are electronic heating elements that install into your seat giving your body warmth on even the coldest days. Unlike conventional vehicle heaters, seat heaters act quickly so there is no waiting around for a break from the cold. These heaters can be adapted to virtually any vehicle and are reasonably priced so that you do not have to pay a fortune for the simple comfort of some heat in your seat. we prefer seat heaters to conventional heaters not only for their fast operating times but also because you do not need to have the noisy and annoying fan blowing in order to feel the heat. If you frequent cold climates, seat heaters are a must have item.
Car Seat Heating,12V Car Heated Seat,Carbon Fiber Heated Pads,Car Seat Heater Element
JiLin Province Debang Auto Electric Co.,Ltd. , https://www.debangcarseatheating.com