1. Panel profile:
2.Technical parameter:
| Model | YX-98-398 |
| Forming speed | 10m/min |
| Thickness of steel coil | 0.4-0.6mm |
| Diameter of roller: | ¢50MM(with thermal refining) |
| Material of roller | high-grade 45# steel (with thermal refining) |
|  Surface of roller coated with chrome of  thickness | 0.05mm |
| Â Material of punching mould | 40Gr (with nitrification treatment) |
| Tolerance of product length | ±2mm |
| Roller station | 15Â stations |
| Motor power of forming machine | 4kw |
| Motor of hydraulic station | 5.5kw |
| Transducer | HOLIP |
| Computer adopts PLC | ENC |
| Computer operating board adopts | Xinjie OP320A |
3.Technical process:
Passive uncoil → feed with guide → roll form → punch → cut into length → output with talbe
4.Flow chart:
5.Equipment includes:
Manual decoiler, main forming machine, stamping mould, hydraulic cutting device, hydraulic station, PLCÂ control cabinet, output table
6.Warranty
one year warranty from date of shipment, and we will provide the technical support for the whole life.
Â
Functional features:
The machine is made up of a stepless speed variable winding chuck and a hydraulic lifting platform. No any pit should be construced in foundation and the chuck need not lift. According to customer requirements can be arranged into a pie wire, tensioning unit, accessories and operators could load on the platform, which enables a constant operating altitude. This machine is suitable for regions wit high level of underground water or workshop unsuitable for pit.
Application:
Over floor vertical winding machine is applied to coil winding for large and middle capacity transformers.
Wire Winding Machine,Vertical Winding Machine,Wire Cutting Machine,Automatic Vertical Winding Machine
JINAN EURO-ASIA MACHINERY CO., LTD , https://www.euroasiamachine.com