Snap in Tubeless TPMS Sensor Valve Stems

    • Model NO.: TR420
    • OEM: Support
    • Trademark: JRL
    • Specification: 53mm
    • HS Code: 848130000
    • Type: TPMS Tire Valve
    • Material: EPDM Rubber, Copper
    • Transport Package: 100PCS/Pack, 10 Pack / Box
    • Origin: China

    Snap in Tubeless TPMS Sensor Valve Stems

    Specification:
    Numbers Found on Valve Stem: 413
    Fits Rim Hole Diameter: .453"
    Effective Installed Valve Stem Height: 1.25"
    Thread Length: 1.2cm / 0.47"
    Cap Diameter: 1cm / 0.39"
    Material: Rubber+Copper
    Finish: Rubber
    Installation: Snaps in (Pull Type) from back of wheel, TPMS Sensor (Not Included) Installs to back of Stem


     

    TR NO. Ref Length
    (mm)
    Rim holes
    (mm/in.)
    Parts
    Rubber
    Grommer
    Washer Nut Cap
    TR420 Φ20x53 Φ11.5/.453"       VC8-S
    DC-G1 Φ16x33 Φ11.5/.453" RG54 RW15 HN9 FT
    TRV700 Φ19x46 Φ11.5/.453" RG54 RW8 HN4 ET/BT
    TRVA100 Φ17.5x41 Φ11.5/.453" RG54 RW15 HN9  
    TRVA200-B Φ16x38 Φ11.5/.453" RG54 RW15 HN9 ET/BT
    TRVA200 Φ17.5x38 Φ11.5/.453" RG54 RW15 HN9 ET/BT
    TRVR300 Φ19x67 Φ11.5/.453" RG54 RW8 HN4 ET/BT
    TRVR300-02 Φ19x58.5 Φ11.5/.453" RG54 RW8 HN4 ET/BT
    TRVR400 Φ17x137x90° Φ11.5/.453" RG54,HG2 RW4   ET/BT
    VW9-2P Φ17x112x90° Φ11.5/.453" RG54,HG2 RW4   ET/BT
    PVR-152 Φ16x65-90° Φ11.5/.453" RG54 RW8 HN4 DT
    PVR-153 Φ17x70-90° Φ11.5/.453'' RG54 RW8 HN4 ET/BT
    Snap in Tubeless TPMS Sensor Valve Stems
    Snap in Tubeless TPMS Sensor Valve Stems

    Snap in Tubeless TPMS Sensor Valve Stems
    Snap in Tubeless TPMS Sensor Valve Stems
    Snap in Tubeless TPMS Sensor Valve Stems

    Snap in Tubeless TPMS Sensor Valve Stems





     

    MP-35Kv Bus Bar Heat Shrinkable Sleeve

    Product Description:
    MP-35KV heat shink busbar sleeve, known as copper bar protection tube, Bus bar Insulation Heat Shrinking tube is made of cross-linked environmental protection polyolefin PE heat shrinkable materials which is bombarded by high power electron beam. 

    Bus bar Energy Heat Shrink Tubing  with good resistance to bending and scratching, high insulation strength and resistance to electric carbon mark, applies to switchgear, substation bus, busbar, electrical equipment for anti-corrosion and insulation protection. Bus Bar Heat Shrinkable Sleeve it`s widely used in electric power industries.
      
    Feature & benefit
    a) resistance to flame and corrosion.
    b) with superior insulated and chemical properties.
    c) Shrink ratio: 2/1 (1 kV, 35 kV, 10 kV busbar )
    d) environmental friendly, high strength, good elasticity, flame-resistant, soft.
     
    Operating indexes:
    a) Min. Shrink temp.: 80 degrees Celsius
    b) Final shrink temp.: ~12 degrees Celsius
    c) Operating temp.: -55~125 degrees Celsius
     
    Up to standard:Approvals

    Meet RoHs compliant


    Product images:

    Heat Shrinkable Tube For 35kv Busbar

    Energy Heat Shrink Tubing

    Energy Heat Shrink Tubing,Heat Shrink Tubing,Large Energy Heat Shrink Tubing,Heat Shrink Tubing for Busbar,Busbar Heat Shrink Tubing

    KEYUACE Materials Co., Ltd. , https://www.insulationtubing.com

    Previous Post: Zinc Aluminum Alloy Die Casting Part High Pressure Pump Parts
    Next Post: Professional Factory Custom Made Plastic Injection Molding Auto Spare OEM Parts
    Home
    Recent Posts
    • March 24 Hangzhou Steel Market Price Quotes
    • Hunan to stop curbing fertilizer prices
    • Nakamura deny herself: Renault will be setting u…
    • Review of China's auto market in 2007 and ou…
    • Dongfeng Dana Axle Full Cost Reduction for All
    Archives
    • 202104
    • 202103
    • 202102
    • 202101
    • 202012
    • 202011
    • 202010
    • 202009
    • 202008
    • 202007
    • 202006
    • 202005
    • 202004
    • 202003
    • 202002
    • 202001
    • 201912
    • 201911
    • 201910
    • 201906
    • 201905
    • 201904
    • 201903
    • 201902
    • 201901
    • 201812
    • 201811
    • 201810
    Tags