The store is selling up every year, LED lighting fixtures are shuffled soon.

After years of development in Nanjing building materials market, the number of stores has been blowout in recent years. Today, there are more than 30 large and small building materials market in Nanjing, with more than 800 lighting merchants. However, in recent years, the Nanjing lighting market has been affected by the sluggish real estate market, the oversupply of lighting merchants, the impact of online e-commerce, and the influence of Changzhou Zouqu lighting market on various factors such as Nanjing radiation. The lighting market business is not as good as one year. The entire Nanjing lighting market has shrunk significantly, and it has declined by around 30 per year. At the same time, for Nanjing lighting stores and merchants, it will face an unprecedented large-scale reshuffle, and more market stores and merchants will face bankruptcy. Recently, Nanjing Jiangdongmen Jinsheng International Home Lighting Merchants responded to the author. Under the circumstance of the whole lighting industry, Nanjing Jinsheng International Home has increased its rent by 8 per year in recent years, and has increased rents by more than 8 per year. Last year, the rent of the store in the market was more than 210 yuan per square meter per month, and this year's price increase reached more than 230 yuan. A lighting merchant in the market told the author that our store has an area of ​​about 250 square meters. Last year, the rent was 620,000, and the store business could only earn about 350,000. Obviously, this performance is not enough for rent. The resources accumulated outside will be used to make up the remaining 270,000 rents. After the market has increased rents this year, it will add another 60,000 yuan for rent. This is undoubtedly worse for the merchants in our market. It is reported that the biggest impact is the traditional lantern store. As the market has increased rents every year, and a batch of lighting merchants have closed down or moved away from here, the number of market lighting merchants has also decreased year by year. It can be seen that the annual increase in rents in Nanjing stores will accelerate the reshuffle of the LED lighting market in Nanjing. As for the second half of the year, how do supermarkets and businesses face the coldest winter and continue to survive in the market? The author believes that it should start from strengthening management and management.

Precision Machining Parts

The precision machining we usually talk about generally refers to precision CNC turning, CNC milling, CNC turning and milling composite machining, grinding, wire cutting, EDM machining, etc. The parts obtained by these machining methods can usually achieve relatively high precision and surface finish. Moreover, CNC machining has a wide selection of materials, and most materials can be used for CNC machining. Since the precision machining parts need to be machined one by one on the machine tool, the cost of mass production is relatively high compared with the parts that are directly formed by the mold. Of course, the most suitable and reasonable processing method to choose mainly depends on the product materials and the requirements of the product itself. We usually choose the most reasonable method according to the drawing requirements and recommend it to customers. Below are some pictures of precision machined parts for reference only.

SCZY has very rich experience in CNC machining. Our normal machining accuracy can reach ±0.01mm, and for some special requirements, the accuracy can reach ±0.005mm (depending on specific products). Commonly used materials we process include titanium alloys (Ti-6Al-4V, etc.), stainless steel (316L, 316F, 304, 303, etc.), aluminum alloys (6061, 6082, 6075, etc.), copper (brass, copper, etc.) etc.), carbon steel, alloy steel, plastic (POM, PA66, ABS, PEEK, etc.) and so on materials.

Our products are mainly exported to Europe and the United States (United States, Germany, Italy, etc.) and Southeast Asia (Vietnam, Sri Lanka, Malaysia, etc.), with professional testing instruments (including CMM, 2D measuring projector, altimeter, micrometer, caliper, etc.) and testing Staff, we ensure product quality before shipping.

Precision Machining Parts,Cnc Milling Machining Parts,Ss Lathe And Milling Parts,Cnc Lathe Machined Parts,Cnc Machining Center

Shenzhen SCZY Technology Co.,Ltd , https://www.szsccasting.com