800L Draft Beer Equipment for Pub, Hotel, Bar, Restaurant Make Craft Beer

Our brewhouse system separated to 2 vessels, 3 vessels, 4vessels and 5 vessels, capacity from 100L
to 20000L, use electric or steam heat. Semi-automatic control and easy to operate.






PRODUCT  FEATURES:

1. Desiging tanks and heating system according to craft, mash tank warming≥10ºC/min
2. Energy saving stir structure : large cross-section impeller, 15r/min speed
3. Sieve plate of filter tank includes welding sieve plate and milling sieve plate.
4. Plow knife of filter tank separated to one foot, feet and bow plow knife
5. Wort boiling heat way includes steam jacket, interior heating and exterior heating.
6. Material includes stainless steel 304, 316 and red copper

PRODUCT FEATURES:

1. Our Fermentation tanks/tun available from 100L to 20000L (1 gallon to 20 gallon) and average
2. 25% Head Space.
3.  All tanks have a Dish top,
4. Cylinder body & 60/70° Cone Bottom.
5. Certified stainless steel(304,316) material for all tanks, with 100% TIG welded joints and seams
6. with sanitary interior polish.
7.  Dimple Plate jacket for Glycol cooling & high efficient Polyurethane foam insulated.
8. All tanks use Tri-clamp connections, are designed for up to 14.7 PSI and tested at 30 PSI.
9.  We can customize fabricate any tank to meet your brewery's space and height restrictions.

Company Profile




We are factory. We supply good quality and competitive price. We supply
installation service. Lifetime guarantee.
 
1.Jinan Tonsen is factory and worked in this business for 15 years.
2.We have 80 front-line production employees,10 production management staff,5 top Professional and
Technical Personnel service for your project.
3.We supply good quality and competitive price.
4.Our service team could be available to oversea installation.
5.We promise lifetime guarantee.




Our Service:

1.We supply the complete turnkey beer brewery equipment include the bottle and barrel filling system
2.The detailed floor plan,CAD drawing and 3D drawing of the brewery,installation pipeline connection drawing,the operation manual
3.We can transport the goods to your delivery place
4.Support sending engineer to install and training technology on site and supervised-installation with remote support
5.We supply the beer recipes,brewing technology
6.3 Years Guarantee service for the beer brewery equipment

Contact Us:
















 



Our brewhouse system separated to 2 vessels, 3 vessels, 4vessels and 5 vessels, capacity from 100L
to 20000L, use electric or steam heat. Semi-automatic control and easy to operate.






PRODUCT  FEATURES:

1. Desiging tanks and heating system according to craft, mash tank warming≥10ºC/min
2. Energy saving stir structure : large cross-section impeller, 15r/min speed
3. Sieve plate of filter tank includes welding sieve plate and milling sieve plate.
4. Plow knife of filter tank separated to one foot, feet and bow plow knife
5. Wort boiling heat way includes steam jacket, interior heating and exterior heating.
6. Material includes stainless steel 304, 316 and red copper

PRODUCT FEATURES:

1. Our Fermentation tanks/tun available from 100L to 20000L (1 gallon to 20 gallon) and average
2. 25% Head Space.
3.  All tanks have a Dish top,
4. Cylinder body & 60/70° Cone Bottom.
5. Certified stainless steel(304,316) material for all tanks, with 100% TIG welded joints and seams
6. with sanitary interior polish.
7.  Dimple Plate jacket for Glycol cooling & high efficient Polyurethane foam insulated.
8. All tanks use Tri-clamp connections, are designed for up to 14.7 PSI and tested at 30 PSI.
9.  We can customize fabricate any tank to meet your brewery's space and height restrictions.

Company Profile




We are factory. We supply good quality and competitive price. We supply
installation service. Lifetime guarantee.
 
1.Jinan Tonsen is factory and worked in this business for 15 years.
2.We have 80 front-line production employees,10 production management staff,5 top Professional and
Technical Personnel service for your project.
3.We supply good quality and competitive price.
4.Our service team could be available to oversea installation.
5.We promise lifetime guarantee.




Our Service:

1.We supply the complete turnkey beer brewery equipment include the bottle and barrel filling system
2.The detailed floor plan,CAD drawing and 3D drawing of the brewery,installation pipeline connection drawing,the operation manual
3.We can transport the goods to your delivery place
4.Support sending engineer to install and training technology on site and supervised-installation with remote support
5.We supply the beer recipes,brewing technology
6.3 Years Guarantee service for the beer brewery equipment

Contact Us:
















 

Vertical Disc Injection Molding Machine

The working principle of the disc Vertical Injection Molding Machine is to use the thrust of the screw (or plunger) to inject the plastic in the molten state (i.e. viscous flow state) after plasticization into the closed cavity, and then get the product after solidification.


Injection molding is a cycle process, each cycle mainly includes quantitative feeding, melt plasticity, pressure injection, mold filling cooling and mold opening. Take out the plastic part, and then close the mold for the next cycle.


Generally speaking, the molding process of the screw disk injection vertical Injection Molding Machine is as follows: first, add granular or powdered plastic into the cylinder, melt the plastic through the rotation of the screw and the heating of the outer wall of the cylinder, then close the mold, move the injection seat forward, make the nozzle close to the pouring port of the mold, and then inject pressure oil into the injection cylinder to push the screw forward, so that the high pressure can inject the melt into the closed mold with a relatively low temperature at a faster speed. After a certain period of time and pressure maintaining (also called pressure maintaining) cooling, solidify it into shape, and then open the mold to take out the product (the purpose of pressure maintaining is to prevent the melt from flowing in the mold cavity in reverse, supplement the mold cavity material, and ensure that the product has a certain density and dimensional tolerance). The basic requirements of injection molding are plasticization, injection molding and molding.

Vertical Disc Injection Molding Machine,Second Hand Vertical Injection Moulding Machine,Vertical Plastic Injection Moulding Machine,Vertical Injection Machine

Ningbo Chenwei Machinery Technology Co.,Ltd , https://www.chenweimachine.com