First, the phenomenon of failure
The engine runs smoothly and the exhaust fumes are normal, but the operation is weak. When there is a sudden acceleration, a small amount of black smoke escapes and the engine does not reach the maximum speed.
Second, the cause of the failure
The reason for this failure is that the fuel consumption of each cylinder is even and the combustion is complete, but the maximum fuel supply cannot meet the requirements, resulting in the engine not being able to deliver maximum power.
1, the operating mechanism can not push the fuel pump load control arm to the maximum fuel supply position, such as accelerator pedal pin loose, accelerator pedal length is not appropriate.
2. The low-pressure oil circuit has too much resistance, the low-pressure oil return valve fails, and the oil pump works poorly, causing the low-pressure oil supply pressure to be too low.
3. Plunger and needle valve parts wear, oil leakage increases; fuel pump fuel supply is adjusted improperly, the full load of fuel is insufficient; governor due to improper adjustment or high-speed spring becomes soft, resulting in the highest idle speed drop.
Third, fault diagnosis
1. When the accelerator pedal is pressed to the end, see if the fuel pump load control arm reaches the maximum fuel supply position. If the load control arm cannot reach the maximum fuel supply position, check the accelerator pedal axis and adjust the lever length.
2. Loosen the bleed plug of the fuel injection pump. Use an electric fuel pump (or hand pump) to pump oil. Check if the low-pressure oil line is open. If the fuel injection pump is not smooth, or if the oil contains air bubbles, check the blocked area or the air intake area.
If the oil flow is normal, use a pneumatic motor to drive the engine to see if the fuel pump outlet screw plug at the oil situation, the oil out of normal, indicating that the oil pump works well.
3. Step on the accelerator pedal and observe the engine's engine tachometer. If it is lower than the maximum idle speed of the engine, it means that the governor is faulty. The fuel pump should be removed for inspection and adjustment. When there is no engine tachometer on the vehicle, the next inspection can be performed.
4. Remove the injector and check the tightness and fuel injection pressure of each injector needle valve.
5, after the above inspection and necessary maintenance, the fault can not be ruled out, then the fault in the fuel injection pump.
Xigong Chusheng (Hubei) Special Purpose Vehicle Manufacturing Co., Ltd. Manufacturers of direct sales sprinkler series, suction truck series, high-altitude truck series, sanitation garbage truck series, wrecker truck series special vehicles
Tipping machines,
Our Tipping machines is used to tip the tipping film on both end of shoelace, or bag handle rope lace. there is fully automatic tipping machine. We have max 1.5meter, 2meter, 2.5meter according to customer demand. We also have semi auto tipping machine, which have no length limited, but need one operator to work.
The advantages of the tipping machines,
1, the processing temperature can be adjusted automatically, normally in 50°to 60°.When reaching the set temp, it will be fixed automatically.
2, the main motor has the overload protection function.
3, the machine is equipped with special safety device and the base of the mold is made of high quality casting, so, the mold can be used for a longer life.
4, strong structure and safe operation and good materials and good brand electrical parts, technically and mechanically, the whole machine can be used for at least 20 to 30 years without any problems.
5, the machine has the function of programming protection, under which function the machine parts will not be easily broken because of reverse or wrong power connection. When power cable is wrongly connected, the machine will not run.
6, the machine will stop working automatically when there is no tipping film feeding, under which function the machine idle running will be avoided.
Tipping Machine,Tipping Film,Automatic Tipping Machine,Transparent Tipping Film, semi auto tippin machine
DongGuan FeiYang Packaging Machinery Equipment Co., Ltd , https://www.feiyang-machinerys.com