1 The Milling Machine Safety Technical Code must be followed.
2 Check whether the machine tool transmission part is reliable before the work. Whether the machine stroke baffle is installed or not, meet the working requirements, and then drive again.
3 The workpieces and tools must be firmly clamped. The tools used for clamping the workpiece must be safe and reliable. It is not allowed to use general wrenches and casings to load and unload workpieces.
4 When the machine tool is working, it is not allowed to stand on the bed, nor is it allowed to stand or sit on the workbench.
5 When loading or unloading workpieces with lifting equipment or lanyards, the “Safety Technical Operation Regulations for Lifting Equipment†and “Safety Technical Operation Rules for Lanyard Workers†must be observed.
6 There must be protective baffles in the work area to prevent flying debris from hurting people. The site should have a proper safety space, and the work piece placement must comply with the regulations for setting the site.
7 Milling of various workpieces, especially during roughing, should be started slowly.
8 During cutting, the speed and adjustment of the tool are not allowed. It is forbidden to touch or measure the workpiece. The body, head and hand must not approach the tool.
2 Check whether the machine tool transmission part is reliable before the work. Whether the machine stroke baffle is installed or not, meet the working requirements, and then drive again.
3 The workpieces and tools must be firmly clamped. The tools used for clamping the workpiece must be safe and reliable. It is not allowed to use general wrenches and casings to load and unload workpieces.
4 When the machine tool is working, it is not allowed to stand on the bed, nor is it allowed to stand or sit on the workbench.
5 When loading or unloading workpieces with lifting equipment or lanyards, the “Safety Technical Operation Regulations for Lifting Equipment†and “Safety Technical Operation Rules for Lanyard Workers†must be observed.
6 There must be protective baffles in the work area to prevent flying debris from hurting people. The site should have a proper safety space, and the work piece placement must comply with the regulations for setting the site.
7 Milling of various workpieces, especially during roughing, should be started slowly.
8 During cutting, the speed and adjustment of the tool are not allowed. It is forbidden to touch or measure the workpiece. The body, head and hand must not approach the tool.
Motor Accessories,Motor Parts,Dc Motor Accessories,Food Machinery Parts
DONGYING SHENGYU METAL PRODUCT CO.,LTD , https://www.castingprocess.com