Gold beneficiation special carbon pulp plant equipment - adsorption tank

Adsorber for adsorbing gold mining operations all slime cyanidation CIP process is selected from the group of gold, also be used for the leaching operation, which is suitably a pulp density of 42% or less.
The working principle of the adsorption tank is: after the slurry and activated carbon enter the tank body, the activated carbon and particles in the slurry are suspended in the tank under the agitating action of the impeller, and the saturated gold-loaded charcoal after adsorption is proposed by the air lifting device. The solid particles and the slurry pass through the trapezoidal sieve discharge pipe and flow into the next tank. Under the action of the blowing pipe, the activated carbon is prevented from clogging the screen, and the slurry is smoothly passed through the mesh hole and overflows the tank body.
The main manufacturers of adsorption tanks include Liaozhong, Zhuyu, Jilin Exploration, Dahua Heavy Machinery and Qunying.
The XF type adsorption tank produced by Liaozhong has the characteristics of low rotation speed, uniform mixing, simple structure, compact structure, convenient maintenance and low power consumption. The technical parameters are listed in Table 1. The shape, structure and installation dimensions are shown in Figure 1 and Table 2. .
The XQG3500 adsorption leaching tank is produced by various mines. It is used as the adsorption tank in the carbon slurry process and the leaching tank in the leaching process. It can also be used as a stirred tank for metal and non-metallic minerals. It is suitable for concentrations up to 43%. , ore density of 2.7, ore particle size - 200 mesh accounted for more than 90% of the pulp. The technical parameters of the adsorption leaching tank are shown in Table 3, and the structure and external dimensions are shown in Fig. 2.
The XF-2200 adsorption tank produced by Qunying is suitable for carbon adsorption operation with a concentration of not more than 45% and an ore particle size of -0.5 mm pulp. After removing the carbon and carbon removal device, it can be used for slurry mixing under the same conditions. operation. The technical parameters of the adsorption tank are listed in Table 4, and the equipment structure and external dimensions are shown in Fig. 3.
The high-efficiency adsorption tank produced by Dahua Heavy Machinery is mainly used for carbon leaching and pulp resin production. Adding activated carbon or resin into the tank to stir, adsorbing the leached gold, has the characteristics of high efficiency, small power, uniform mixing, reliable operation, simple structure and easy maintenance. The technical parameters are shown in Table 5.
The XFCA series high-efficiency energy-saving adsorption tank produced by Jilin prospecting is mainly used for the production of gold by the carbon slurry method and the slurry resin method. The activated carbon or resin is added into the tank to stir and adsorb the gold that has been leached. Practice has proved that the adsorption rate is over 99%, and the wear rate of carbon and resin is the same as that of similar foreign equipment.
The device has the characteristics of high efficiency, small power, uniform mixing, reliable operation, simple structure and easy maintenance. If the user has special requirements, it can be made according to user requirements.
Working principle: The power motor drives the main shaft of the planetary cycloid reducer to drive the double impeller to rotate clockwise, so that the slurry in the tank produces axial and radial flow, and is ventilated through the hollow shaft, and the impeller is stirred to promote the refinement of the bubble. The material and the activated carbon are uniformly suspended, and the saturated gold-loaded carbon is discharged out of the tank through the air lifting device, and proceeds to the next process.
Model meaning example XFCA2020: XF - adsorption; C - slot; A - needle swing drive (no A is worm worm gear drive); 20 - tank diameter 2000mm; 20 - tank height 2000mm.
A schematic diagram of the structure is shown in Figure 4, and the technical parameters are shown in Table 6.
    figure 1   figure 2   image 3   Figure 4
    Table 1, 2   table 3   Table 4   table 5   Table 6

2 ton sitting on electric reach truck

Zowell FRB20 model sitting on Electric Reach Truck is standard with side shift function. It is an industrial material handling equipment, which refers to the forward moving wheel type vehicle which carries out loading and unloading, stacking and short distance transportation of the good by pallets.

There are also many options like camera and monitor, EPS function, AGV modification, height preselection function etc. The sitting on electric reach truck is a high performance truck with perfect performance and excellent safety.

What's more, it is equipped with intelligent system, American Curtis controller system, double AC system ensure its flexible operation in the big warehouse.

Detail features


1. Wider area for the leg
The legroom of the operating position is ample, allowing the operator to move flexibly. They will feel comfortable without worrying about being cramped.

2. Sitting type operation
The seat is adjustable. The soft seat can relieve fatigue and provide a safe and comfortable driving experience for operators.

3. Design of low center of gravity
The design of low center of gravity can ensure stability of the truck so that it is anti-overturning even in complex working conditions.

4. height-limited lifting

5. Turning speed limiting device
The precise high speed limiting turning control technology can prevent side overturning, thus protecting the goods from dropping.

6. Good lifting ability
The max lifting height is 9000mm which can meet the requirements of goods stacking in certain height.

7. Front moving function
The fork can move forward for 590cm,which can reduce turning radius of the truck as well as ensure running stability.

8. Small turning radius

This reach truck has a small turning radius which is only 1700mm. It can move flexibly even in very tight warehouse and workshop areas.

9. Tilt forward and backward

The fork can tilt forward and backward for easy loading and unloading of goods and material, thus improving the transporting stability of the reach truck.

10. Forged fork
The width of the fork can be adjusted within the range of 200-760mm. It is suitable for working conditions with both single side pallets and double side pallets.


Reach Truck,Reach Truck Forklift,Electric sitting on Forklift,Hyster reach truck

Suzhou Pioneer Material Handling Equipment & Technology Co., Ltd , https://www.xianfengforklift.com