Some people may think that the stage car cannot achieve the effect of the live stage. After all, the space is too small to complete the equipment. Too few props can not achieve the desired results. In fact, the stage car has quite complete functions. The stage facilities are already available, and its various devices play an irreplaceable role.
The car of the stage car is loaded with the equipment of the entire stage installation. It is through a certain mechanical operation to realize the unfolding, construction and arrangement of the temporary stage. In order to achieve a certain stage effect, devices such as wires and sockets that are connected to the power supply are also installed around the compartment. In addition, some of the equipment that regulates and controls the machine are built around the car of the stage car, and are equipped with different lights and switches in different locations, in order to make the atmosphere more lively and achieve a better stage effect.
In addition, the construction of the upper platform top of the stage vehicle is indispensable, and some successive wires are supported by the top of the platform to better flow out of the space for performance. In addition, in the open air environment, the table top can also be used to shelter the wind and shelter the rain, providing a good environment for the actors. And the arrangement of the lights should be placed on the stage to illuminate the entire scene, and some light source configurations can be suspended at the top of the table to achieve the effect.
The function of the bracket around the stage car is also quite large. From the perspective of the entire visual effect, only the height of the stage placement can present the overall scene. Only through the support of the bracket can enhance the overall height of the stage. Generally, the bracket uses a high-strength mixed material, and the double-enveloped structure ensures a certain degree of safety. The brackets installed around the perimeter not only allow the entire stage to be in a stable and balanced state, but also reduce the arrangement of the ground.
Of course, some common stage equipment, scene curtains, lighting support rods, and audio facilities, etc., are properly assembled on stage vehicles and are handled in an orderly manner, so they also have their own important functions.
1.0Mpa water separator include WS, FWS, TWS series, both of them with aluminum alloy material, flow rate from 0.9m³/min to 70m³/min, separated about 99% liquid water from compressed system . WS series fit for YD and YD-B series air filter, FWS series fit for YF and YF-B series air filter, TWS series fit for DT series air filter.
How does water separator work?
The gas-water separator is composed of many baffles, and the fluid changes its flow direction many times in the separator. Due to the large mass inertia of the suspended water droplets, when the flow direction of the baffle changes, the dry steam can bypass the baffle Continue to move forward, and the water droplets will accumulate on the baffle. The steam-water separator has a large flow area, which reduces the function of the water droplets. Most of them will condense, and finally fall to the bottom of the separator and be discharged through the trap.
All YUKA Series water separator with high efficiency of separated gas and water, according the grativity,high speed cyclone rotate to distinguish the water and water, condensate will be remove by the auto inner drain. Zero pressure loss and save power and save your money.
Water Separator For Compressed Air,Filter Water Separator,Air Compressor With Water Separator,Water Separator Filter Air Compressor
Hongrijia Depurate Facility Science & Technology Co.,Ltd. , https://www.yukafilter.com