With the rapid development of the machine tool industry, the machine tool accessories industry has continued to rise. At present, it is the prime time for the purchase of plastic towline. Many users buy plastic tow chains and only use it to understand when to repair and repair plastic towline? Here are four ways to judge the failure of the plastic towline:
1. Test exchange method
That is, in the case of analyzing the general cause of the failure, the maintenance personnel can replace the suspected portion with the spare printed circuit board, integrated circuit chip or component, thereby narrowing the fault range of the plastic towline to the printed circuit board or chip level. .
2, parameter inspection method
When a fault occurs, the system parameters should be checked in time. The parameters are usually stored in the bubble memory or stored in the CMOS RAM to be held by the battery. Once the battery is insufficient or due to external interference, the individual parameters of the plastic towline are lost or changed. Chaos, the machine is not working properly. At this point, the fault can be eliminated by checking and correcting the parameters.
3, visual inspection
It is the first method used by maintenance personnel, that is, when the fault diagnosis is performed, the observation and inspection are performed one by one from the outside to the inside. It is important to note whether there is a missing piece.
4, function detection method
The function program test method is to program the G, M, S, T, F functions of the numerical control system into a functional test program by programming, and store them on the corresponding media, such as paper tape and tape. Run this program during the troubleshooting of the plastic towline to quickly determine the likely cause of the failure.
I hope that everyone pays attention to the daily maintenance and repair of the plastic towline. Maintaining the towline can not only extend the service life of the plastic towline, but also reduce the cost and improve the work efficiency.
(Finish)We started to export 10kV Transmission Line Steel Pole to Philippines from 2004 and supply more than 50,000 pcs each year.
Our firm introduced whole set of good-sized numerical control hydraulic folding equipment(1280/16000) as well as equipped with a series of good-sized professional equipments of armor plate-flatted machine, lengthways cut machine, numerical control cut machine, auto-closed up machine, auto-arc-weld machine, hydraulic redressing straight machine, etc. The firm produces all sorts of conical, pyramidal, cylindrical steel poles with production range of dia 50mm-2250mm, thickness 1mm-25mm, once taking shape 16000mm long, and large-scale steel components. The firm also is equipped with a multicolor-spayed pipelining. At the meantime, for better service to the clients, our firm founded a branch com. The Yixing Jinlei Lighting Installation Com, which offers clients a succession of service from design to manufacture and fixing.
10kV Steel Pole, Low voltage Steel Power Pole, Steel Power Tubular Pole, Steel Tubular Post
Jiangsu Xinjinlei Steel Industry Co., Ltd. , https://www.jinleisteeltower.com