From the technical point of view, the hydraulic hybrid bus is a technology that recovers the braking energy of the bus frequently braked by the hydraulic power system, and then uses the recovered energy to drive the bus to start and accelerate. Getting started is the most fuel-intensive phase of the bus. If the energy recovered by the brakes is used in the starting and acceleration stages, it will save energy. Take the diesel bus with a length of 11 meters and a total weight of 15 tons as an example. The average recovery of 20 ml of diesel oil per brake is 1000 times per day, which can save 7,000 liters of diesel per year. The most important stages of bus emissions are the parking idle speed and the low start phase. The hydraulic hybrid bus's start-up and low-speed engines can not be driven. The engine can be automatically turned off when the vehicle is idling, thus eliminating or greatly reducing the black smoke and other emissions during start-up, acceleration and parking idling. %.
The first difference with other types of new energy vehicles is that hydraulic hybrid buses can be installed not only on new cars, but also on existing vehicles. After installation, the structure and performance of the original buses are not changed. The second difference with other types of new energy vehicles is that there is an independent engine drive mode, which is driven by the performance and power of the original bus; there is also an alternate driving mode of engine power and hydraulic power, with the performance of the hydraulic hybrid bus. Power driving. Therefore, hydraulic hybrid buses are not only equipped with new buses with an annual growth of 50,000, but also active buses with a capacity of 350,000. The energy-saving and emission-reducing performance of most active buses in China is not up to standard, and more than 200 billion yuan has been completely completed. Since the cost of installing the hydraulic hybrid system is not more than 70,000 yuan, the emission reduction and energy-saving performance of the original bus can reach the Euro III or Euro IV standard, which is favored by the active bus. The third difference with other types of new energy vehicles is that many new energy vehicles require supporting ground facilities, including funding, site and safety issues, such as alcohol, ether fuel vehicles, gas stations, biodiesel. Fuel-fueled vehicles require gas stations, hydrogen-fueled vehicles need hydrogen refueling stations, electric vehicles need charging stations, etc., while hydraulic hybrid buses do not need to increase ground facilities, and there are no related problems.
The heating elements of electric cooker include electric heating tube type heating plate and P.T.C. element heating plate. Electric heating tube type heating plate has good insulation, corrosion resistance, thermal conductivity and mechanical strength, long life and high efficiency; P.T.C. element heating plate has the characteristics of positive temperature resistivity and automatic temperature control, high efficiency, no open flame,
Less affected by power fluctuations.
The temperature control elements of the Rice Cooker include a bimetal temperature control system and a magnetic material temperature control system. The former is not as safe and reliable as the latter. The electric rice cooker is divided into combined type and integral type according to the structure of the pot body; according to the pressure in the pot, it is divided into low pressure type (0.04MPa), medium pressure type (0.1MPa) and high pressure type (0.15~0.2MPa); The methods of heating food are divided into direct heating and indirect heating.
Electric Rice Cooker,Smart Electric Rice Cooker,Large Electric Rice Cooker,Home Electric Rice Cooker
Guangxi Nanning King Green Smart Co., Ltd. , https://www.smartliferobot.com