Sealing cracking repair: first clean the cracked area of ​​the sealant with a rag and alkali to wipe off the electrolyte. (Be careful not to wash the cracked area directly with alkaline water, so as not to infiltrate the battery and neutralize the electrolyte), then dry the cloth The cracked area is wiped dry. Finally, the sealant at the cracked area is blown and melted with an electric hair dryer. After the natural cooling, the cracked area is repaired. If there is no hair dryer, you can use a flat screwdriver (also known as a screwdriver) to burn the red on the stove, and then directly heat the sealant at the cracked place to repair it.
Crack repair of the shell: After removing the sealant (mostly bitumen) with a small knife, gently put the electrode plate set; put the remaining electrolyte in the battery into the plastic container; use the alkaline water in the empty battery shell. Or alkaline detergent washing several times, and then washed with water or dry with a hair dryer; with a knife to scrape the cracked, with epoxy glue or "home necessary viscose" to fill cracks every day After the adhesive is hardened, fill the battery case with clean water, and try to leak without water leakage. If there is no water leakage, pour clear water and reinstall the electrode plate assembly in the battery case. Use asbestos rope or plastic sheet to seal the gap around the battery. Fill in, then slowly pour the molten asphalt into the inside, until the asphalt dries up and pours into the electrolyte. If the electrolyte is insufficient, you can add it to the auto repair shop.
Repair of the pole fracture: first wipe the battery with a rag and alkali to wipe off the electrolyte, then use a knife to scrape the oxides until the lead shines. Press the length of the pole from the aluminum beverage can. Cut a short section of aluminum skin, and then roll the aluminum skin into a circle around the pole of the broken pole according to the diameter of the pole. Finally, the broken pole is melted on the fire with a small iron spoon, and slowly cast in the In the aluminum skin, after it is naturally cooled, the aluminum apron is removed and the new pole is cast.
This is our NEW DESIGNED selfie Coffee Printer, it can print on milk, coffee, drinks, and milkshake, cakes, chocolates, ect, It is largely updated from the old coffee printer,faster speed,lower cost,and more convenient operating system.
Picture
Parameters
Product name
Wifi coffee printer
Ink color(Edbile ink)
Cyan, Magenta, Yellow, Black
Printer head
HP-803 head
Printing speed
20s/cup
Max print resolution
600*600dpi
Max printing size
11*11cm
Print height Adjustment
0-19cm
Printer size
41*43*42cm(Length*Width*Height)
Package size
49*52*52cm(Length*Width*Height)
Operation Temperature
10 ° to 30 °
Wifi
Support
Weight
16Kg
Power supply
AC 220V/110V
Height adjustment
Full automatic
Operation systems
Windows 7-10
Ink system
Ink cartridge
Warranty
Three years
Selfie Coffee Printer,Selfie Coffee Printer Machine,Automatic Selfie Coffee Printer,Digital Selfie Coffee Printer
Shenzhen Refinecolor Technology Co., LTD. , https://www.szcoffeeprinter.com