A: stable and reliable 1,99% oil separation efficiency of new oil separation system, the unit does not need to add oil after boot. 2, Unique winter condensing pressure constant regulation system, to eliminate the shortage of winter cold fluid supply and insufficient compressor oil phenomenon, 3, each unit factory value are standard computer controller, automatic adjustment of compressor running time, extended compression Machine life. 4, Each unit comes standard with a full set of safety protection module, including phase loss, reverse phase sequence, over voltage, under voltage, oil pressure, high pressure, low pressure, electronic low liquid level, electronic motor overload. 5, a unique secondary gas-liquid separation design, to maximize the liquid hammer. 6, reserved for remote alarm output wiring points, to facilitate customer monitoring.
Two: energy-efficient 1: can be the same size with the compressor, to provide more regulation series, cold output can be more smooth dynamic match the actual load. 2: The computer controller adjusts the best running curve of the unit under the partial load of daily part, saving a great deal of power for the end user. 3: Precise pipe design minimizes pipeline temperature loss and increases efficiency. 4: The use of high-efficiency oil separator, lubricating oil only a small part into the system, reducing the number and time of defrosting and improve the efficiency of the system. 5: While increasing the humidity of cold storage, it also reduces the wet load of the evaporator, reduces the number and time of defrosting, and improves the efficiency of the system. 6: The unit can be used hot fluoride defrost program, reducing the defrost power consumption, the system more energy efficient.
Three: accurate temperature 1: Microcomputer control parallel unit real-time matching dynamic load, significantly reduce evaporation pressure fluctuations. 2: automatic evaporation pressure regulating device, precise control of cold storage temperature, while making the cold storage temperature constant, so as to ensure accurate relative humidity.
The above is about the advantages of the parallel compressors system installation 3:00, generally used for large-scale cold storage installation of the project. What kind of specific selection of refrigeration equipment based on customer's cold storage project design to determine.
Hot-dip galvanizing (HDG) is the process of coating iron, steel or ferrous materials with a layer of zinc. This done by passing the metal through molten zinc at a temperature of 860°F (460°C) to form zinc carbonate (ZNC03). Zinc carbonate is a strong material that protects steel and can prevent corrosion in many circumstances. Hot-dip galvanizing can be carried out cheaply and in large batches.
Oval Steel Pipe,Welded Oval Pipes,Astm Welded Oval Tube,Stainless Steel Oval Pipe
SHANDONG HUITONG STEEL CO.,LTD , https://www.cnhuitongsteel.com