Proper selection of several elements of the metering pump

    What information is needed to properly select a metering pump?

    1, is the measurement of liquid flow.

    2, was measured the main characteristics of liquids, such as chemical corrosion, viscosity and specific gravity.

    3, the system's back pressure.

    4, the appropriate suction height.

    5, the other options needed, such as analog control, pulse control, flow monitoring and timer.

    What are the main advantages of electromagnetic driven metering pump?

    Electromagnetically driven metering pumps have only one moving part - the armature shaft. Generally, the less moving parts, the more reliable the metering pump works. Metering pump is ideal for low-flow, low-pressure workplaces, and good compensation in the supply voltage fluctuations.

    And fixed frequency, change the stroke length of the metering pump, the fixed stroke length, change the frequency of the metering pump What are the advantages?

    By calibration, the dosing amount for each stroke is known. The total dosage can therefore be calculated (dosing = dosing per stroke * frequency). The total dosage is linear with frequency (50% frequency = 50% dosing). Through external pulse or analog control, dosage can be transferred from minimum to maximum in one second. In addition, it is much less costly than motor-driven stroke length adjustment.

    How to use the performance curve of the metering pump?

    1, to find the selected metering pump performance curve corresponding.

    2, in the chart below indicate the current back pressure.

    3, determine the correction factor, take the bar as the unit of the back pressure value, extending up to the curve, at the cross point vertically to read the correction factor value.

    4. Divide the amount of dosing required by the correction factor to give the value in ml / min. Or L / h.

    5, put the calculation results in the middle of the dosage scale.

    When placing this value on the dosing scale, a ruler can be used to find the stroke length setting and stroke frequency setting.

    General Pressure Gauge

    Pressure Gauge,Oil Pressure Gauge,Air Pressure Gauge,Pressure Gauge Price

    HONGQI INSTRUMENT (CHANGXING) CO.,LTD , https://www.hongqi-instrument.com

    Previous Post: Gao bird made progress in the development of automatic cutting machine
    Next Post: The top 30 auto industry in Fujian
    Home
    Recent Posts
    • An annual output of 15,000 sets of engineering t…
    • Continuous development of cutting methods for di…
    • In the selection of solenoid valve must pay atte…
    • Strengthen internal strength and compaction mach…
    • Chongqing National Machine Tool National Science…
    • Heat pump energy-saving thermostat technology in…
    • Real-time detection of tool status in CNC machin…
    • World Tanker Voyage Leasing Operating Rate Quote…
    • Water source heat pump knowledge introduction
    • The opening up of the Chinese auto industry must…
    • Gao bird made progress in the development of aut…
    • Proper selection of several elements of the mete…
    • The top 30 auto industry in Fujian
    • Solar - air double heat source heat pump and hot…
    • Successful development of new composite processi…
    • Sealing Technology of Hydraulic Valve and Its An…
    • Emerson digital smart valve controllers are ATEX…
    • Multinationals in China: Outside China, Netherla…
    • Bypassing domestic monopoly giant private oil co…
    • The world's smallest ultra-sensitive tactile…