There are ways to prevent the burning of gasoline generators

Through careful attention to details, Ito Power believes that the burning failure of gasoline generator sets can be completely avoided. Starting from the common point of operation of various types of gasoline generator sets, Ito Power has summarized the methods for preventing the burning of gasoline generator sets.

First, talk about hygiene. Gasoline generators in operation, if dust, water and other debris into its internal, will form a short circuit medium, can damage the insulation of the wire, resulting in a short circuit between the turns, the current increases, the temperature rises and burns the gasoline generator set. Therefore, dust, water stains, and other sundries should be prevented from entering the interior of the gasoline generator set. At the same time, the exterior of the gasoline generator set must be cleaned regularly. Do not allow the dust and other debris in the heat dissipation ribs of the gasoline generator set to ensure gasoline power generation. The unit has good heat dissipation.

Second, observe and listen carefully. Observe gasoline generators for vibration, noise, and abnormal odors. Gasoline generators in operation, especially high-power gasoline generators should always check the anchor Bolts, gasoline generator set end caps, bearing glands, etc. are loose, grounding device is reliable and so on. If the vibration of the gasoline generator set is found to increase, the noise increases and an odor develops, the machine must be shut down as soon as possible and the cause must be eliminated.

Third, the current is maintained. Gasoline generator sets overloaded due to excessive load, low voltage or mechanical lock-up. Therefore, during the operation of the gasoline generator set, it is necessary to pay attention to checking whether the transmission operation is flexible and reliable; whether the concentricity of the coupling is standard; the flexibility of the gear transmission, etc. If any stagnation is found, it shall be immediately shut down to eliminate the malfunction. Run again.

Fourth, regular inspections and repairs. The technical condition of the gasoline generator set control equipment plays a decisive role in the normal startup of the gasoline generator set. Therefore, the control equipment of the gasoline generator set should be set in a dry, ventilated and easily operated position and be dusted regularly. Always check the contactor contactor, the coil core, the wiring screws, etc., are reliable, whether the movement of the mechanical parts is flexible, so as to maintain a good technical state, so as to ensure the normal operation of the gasoline generator without being burned.

It can be seen that starting from the details is the key to prevent burnout failures. At the same time, we also need to pay careful attention to the signs of burnout failures, match the burnout failures with their causes, and improve the standardization of use and maintenance so that gasoline can be avoided as much as possible. Generator burning failure occurs.