Use caution when using:
1. Use bench drilling machine, strictly prohibited gloves,
2. It is strictly forbidden to put a cotton yarn head on the worktable (to prevent the drilling machine from hurting while working).
3. The correct use of tools, especially when installing and unloading the drill, must use a special key and cannot use a hand hammer to beat (to prevent the central axis from being deformed)
4. Power outages after the end of each day's work, cleaning and using rags.
5, to adjust the speed of the drilling machine, stroke, clamping tools and workpieces, as well as polishing drill to stop.
6. After the drilling machine is started, it is not allowed to touch the moving parts, tools and transmission parts. It is forbidden to transfer or take tools and other items across the rotating part of the machine.
7. When the drill bit is wound around the long crumbs, it is necessary to stop and remove it. It is forbidden to use the mouth blow and hand pull, and you should use a brush or iron hook to remove it.
8. When two or more persons are working on the same machine tool, one person must be responsible for safety and unified command to prevent accidents.
9. If abnormal conditions are found, stop immediately and ask relevant personnel to check.
10. When drilling machine is in operation, it is not allowed to leave the job. For the reason, it must stop and cut off the power when leaving.
11. After the work is completed, close the machine's main gate, wipe the machine, and clean the work place.
12, before use to check whether the drilling machine parts are normal
1. Use bench drilling machine, strictly prohibited gloves,
2. It is strictly forbidden to put a cotton yarn head on the worktable (to prevent the drilling machine from hurting while working).
3. The correct use of tools, especially when installing and unloading the drill, must use a special key and cannot use a hand hammer to beat (to prevent the central axis from being deformed)
4. Power outages after the end of each day's work, cleaning and using rags.
5, to adjust the speed of the drilling machine, stroke, clamping tools and workpieces, as well as polishing drill to stop.
6. After the drilling machine is started, it is not allowed to touch the moving parts, tools and transmission parts. It is forbidden to transfer or take tools and other items across the rotating part of the machine.
7. When the drill bit is wound around the long crumbs, it is necessary to stop and remove it. It is forbidden to use the mouth blow and hand pull, and you should use a brush or iron hook to remove it.
8. When two or more persons are working on the same machine tool, one person must be responsible for safety and unified command to prevent accidents.
9. If abnormal conditions are found, stop immediately and ask relevant personnel to check.
10. When drilling machine is in operation, it is not allowed to leave the job. For the reason, it must stop and cut off the power when leaving.
11. After the work is completed, close the machine's main gate, wipe the machine, and clean the work place.
12, before use to check whether the drilling machine parts are normal
Rear Differential Pump For Volkswagen
Rear End Oil Pump,Lubrication Oil Pump,Electrical Parts Differential Rear Pump,Rear Differential Pump For Volkswagen
Wenzhou ShengMu Trading Co., Ltd. , https://www.smatuoparts.com