The barite has a large specific gravity, and the proportion of its commensal gangue is generally small. The re-election method can be used to treat the barite ore to obtain a better beneficiation effect. So what equipment is needed to re-select the barite mine?
The barite re-election equipment refers to the jig. The jig has the characteristics of large particle size, wide grain size, large processing capacity and good beneficiation effect. The re-election of barite also includes various jig mineral processing auxiliary equipment, such as vibrating screen, crusher , dewatering screen, electromagnetic vibrating feeder and so on.
Any beneficiation equipment has a certain size, even if the jig with larger grain size is selected, the crushing before the ore is selected must be the first process. The ore can be broken into the selected particle size to enter the concentrator. sorting. In the crushing process, the selection of the crusher is also very particular, such as broken fluorite , barite and other brittle, brittle ore often uses a jaw crusher instead of a hammer crusher or a counter crusher to avoid The material is broken into powder.
There are certain requirements for the selected grain size of the ore dressing equipment. The content of the ore dressing equipment can improve the processing capacity and the beneficiation effect. Therefore, the crushed material needs to be sieved to meet the selection of the barite jig. granularity.
The more uniform the dressing of the jig, the better the ore dressing effect, the greater the processing capacity. Therefore, in the jig concentrator, the indispensable feeding equipment is the electromagnetic vibrating feeder, which can help the jig to be efficient. Complete the ore dressing operation.
Since the jig beneficiation belongs to wet beneficiation, the water content of the concentrate and tailings discharged by the jig is relatively large. According to the customer's demand, the dewatering sieve equipment conforming to the type of the jig can be configured to achieve the effect of material dewatering.
Nonwoven Fabric for Auto Filter, Nonwoven Fabric for MASK , Nonwoven Fabrice for air filter
We specialize in various types of filter media, such as polypropylene filter media, polyester filter media and composite filter media. Process technologies include melt-blown, needle-punched and laminated composites (adhesive, ultrasonic, etc.). The products are widely applied in industrial air filtration; vacuum cleaner filtration; vehicle cabin filtration; and protective respirators and clothing.
Melt-blown Filter Media
Handanfy has expertise in different air filtration media, such as polypropylene filter media, polyester filter media and composite filter media, we manufacture the top notch products in every aspect.
Composite Fiber Filter Media
Composite fiber filter media consists of a fibrous filtration layer and pleatable stiffening layers which help to increase the capacity to hold dust. A flexible covering layer helps to stop the loss of fibers, prolonging the lifespan of products. Composite fiber filter media is used in bag filters, panel filters and in general ventilation systems.
The following are the latest in our range of products, including Activated Carbon Composite Filter Media, Auto Ceiling Fan Media and Filter Core of Wet Film Humidifier. Please click the images to find out more information
Non Woven Fabric Series,Nonwoven Fabric For Auto Filter,Nonwoven Fabric For Mask,Nonwoven Fabrice For Air Filter
Hebei Fangyu Trade Co., Ltd. , https://www.filtersmaterial.com