Fireproof chemical protective clothing use method and use notes

Fire-fighting chemical protective clothing is a kind of protective equipment specially designed for firefighters to enter the fire or accident scene of chemical dangerous goods or corrosive substances. It consists of a flame retardant anti-chemical layer, a fire-proof insulation layer and a comfort layer, and has various functions such as emergency call and communication.
Fire-fighting chemical protective clothing is a protective clothing worn by workers to protect themselves from chemical dangerous goods or corrosive materials when they are working on hazardous chemicals or corrosive materials. The main body of the fire-proof chemical protective clothing is made of brocade with flame retardant and viscous treatment, and double-sided coated with flame-retardant and anti-chemical surface glue. The main rubber cloth only produces carbonization when it encounters fire, and it can maintain good strength without insoluble drops. The main body tape is made by the lamination-sewing-striping process, the main body of the garment and the glove, and is equipped with a flame-retardant, voltage-resistant, puncture-proof boot or fire-fighting rubber boots to form a complete garment.
Fire protection suits use method
(1) First open the neck, chest, and feet of the garment into the pants, lift the pants to the waist, then extend the arms into the two sleeves, and put the inner cuff ring on the thumb.
(2) After folding the top protective cloth, pull over the chest and cover the cloth tightly, and then fasten the front chest.
(3) After tightening the belt, the big white buckle will be fastened.
(4) After putting the fire mask on, put the head cover on the head and put the big white buckle on the neck buckle.
(5) After wearing the gloves, put the inner sleeves on the gloves.
Fireproof chemical protective clothing use precautions
(1) Fire-fighting chemical protective clothing shall not be in direct contact with flames and melts.
(2) Before using the fire-fighting chemical protective clothing, the clothing must be carefully inspected for damage. If it is damaged, it is strictly forbidden to use.
(3) When using, it must be noted that the hood and the mask of the mask are closely matched, and the large buckle of the neck buckle and the white buckle must be fastened to ensure the neck and airtight. The belt must be tightened to reduce the "window effect" during exercise.
(4) After each use, wash with soapy water or 0.5-1% sodium carbonate aqueous solution according to the soil condition, then rinse with water, put it in a cool and ventilated place, dry and pack.
(5) When folding the fire protection suit, spread the hood opening up to the ground. Fold back the hood, neck strap and two sleeves, then fold the garment longitudinally, and the left and right overlaps, the two boots are pointed to the outer side, the glove is placed in the middle, the sole is rolled into a roll, and the protective garment bag is placed horizontally. Inside.
(6) Fire-fighting chemical protective clothing is strictly prohibited from being exposed to heat and sunlight during storage, and is not allowed to be exposed to active chemicals and various oils.

Syringe Production Line:

 

This syringe production line is our main project. It includes various syringe production, like 2 parts syringe production line, 3 parts syringe production line, insulin syringe production line, safety syringe production line etc. Most of the syringe manufacturing machines are full automatic. So it will greatly reduce the labor cost. The production rate can reach 200 pcs/min.

 

The necessary equipment for syringe production including: syringe molds, syringe barrel Printing Machine , Syringe Assembly Machine, Syringe Packing Machine and syringe EO Sterilization Machine.

 

We not only providing the necessary syringe making machines, but also providing the raw material, installation service, technique and operation training, the workshop layout design and cleaning workshop construction etc.

 

If you`re interested, welcome to contact us at any time.

 syringe production line

FAQ:

 

1. Are you a manufacturer?

Yes, we are the professional manufacturer set up in 1992, located at a beautiful town of Zhejiang Province.

2. Can you provide the oversea service?

Yes, after the machines arrive at your factory, we will arrange engineers go to install the machine and train your operators.

3. Can we visit your factory?

Of course. We highly welcome clients come to visit our factory. It will be our great honor to meet you.

4. How can you guarantee the quality?

100% qualified products before the delivery. The clients can inspect the products at our factory.

1 year warranty ( failure caused by machine quality ) from the equipment arrive at the client`s factory. Lifetime maintenance and offer for the spare parts.

Syringe Production Line

Syringe Production Line,Plastic Syringe Making Machine,Syringe Making Machine,Disposable Syringe Making Machine

Yuhuan Zhengri Technology Co., Ltd. , http://www.syringemachine.com