Henan Yongcheng Xinqiao Plant Self-made Small Hanging Vibration Grading Screen

    First, the research background

    Vibrating screen is a vibrating screening machine suitable for dry screening of wet fine-grained hard-to-screen materials. It is a vibrating screening machine for domestic processing of difficult-to-screen materials. It is mainly used for the classification of medium-sized materials and has stable operation. The utility model has the advantages of reliable work, simple structure, less wearing parts, convenient screen replacement, high screening efficiency and good screening effect.

    In recent years, the coal quality of mines has deteriorated, mainly in the following aspects: First, the raw coal ash is unstable, the fluctuation is large, and the overall ash content rises, and the intermediate density content increases, which brings great difficulties to the coal preparation plant. Second, the final coal content in the raw coal gradually increased, resulting in the original part of the equipment can not adapt to the current coal quality, often failure, affecting production continues.

    Second, the main content

    The Xinqiao plant adopts the traditional jigging coal preparation method. Among them, after the jigging coal is dehydrated by the bucket elevator, the raft is fixed by the fixed raft on the inner wall of the chute, and the material is sieved into the 318 crusher. The end of the original or into the end. As the coal quality of the mine deteriorates, the coal content of the coal in the jigging increases, and the dewatering of the bucket lifter is difficult, resulting in the wetness of the coal. The classification effect of the original fixed graded scorpion is worse, often blocked, requiring frequent manual cleaning, and The processing capacity of 318 crusher is limited. A large amount of coal enters the 318 crusher, which increases the load of the crusher and affects the crushing effect of the crusher. In severe cases, it will block the crusher and affect the normal production.

    After repeated argumentation, the Xinqiao Plant decided to use a vibrating screen to classify the coal to improve the classification efficiency. However, due to the limitation of the on-site space, it is impossible to install a large vibrating screen. The small vibrating screen cannot be purchased directly in the market, and it is required to be ordered by the manufacturer, which is expensive and has a long processing cycle. In this regard, the plant organized relevant technical personnel to independently develop and design the YD1014 small hanging vibration grading screen and put it into use.

    Third, the main innovation points

    1. YD1014 small hanging vibration grading screen is independently developed by the factory, with short processing cycle and low cost;

    2, no need to make major changes to the site, and the classification effect is better, the maximum cost savings;

    3. Reduce the frequency of on-site staff cleaning chutes and reduce the labor intensity of employees.

    Fourth, the effect evaluation

    After the hanging sieve is put into use, the classification effect is better. After the jigging, the fine coal material of the coal is directly sieved into the downstream system, which reduces the pressure of the coal crusher, avoids the jamming accident of the crusher, and ensures the coal system. The normal operation eliminates the safety hazards during the operation of the employees.

    Road Sweeper Truck mainly used to clean gravel, sand, mud, dust and other road waste.. And it is also called Road Sweeper Machine, Sweeper loader. Unique side brush design, increase the cleaning width, improve the cleaning efficiency, and clean the garbage along the stone edge. The side brush and the main brush can be operated independently and are detachable. Using independent skeleton structure processing and welding, to prevent the deformation of the cleaner and open the welding, and extend the service life of the equipment. The garbage bin adopts the design principle of storage and collection before cleaning, which greatly improves the use rate of garbage bins.

    The motor and the brushing spindle are connected by a direct connection and a flexible connection to reduce the different shaft problems of the motor and the spindle and prolong the service life of the motor.

    Road Sweeper Truck

    Road Sweeper Truck,Road Sweeper Machine,Cleaner Truck Road Sweeper,Road Cleaning Truck

    SINOMICC INTERNATIONAL , https://www.rockstartyre.com

    Previous Post: The strategic cooperation of the Fast Group has achieved remarkable results. The sales revenue in the first half of the year increased by 18% year-on-year.
    Next Post: Online judgment and treatment of bag dust collector breaking bag
    Home
    Recent Posts
    • Wear Resistant Alumina Ceramic Lined Composite S…
    • Brand New Special Shape Silicon Carbide Seal Rin…
    • China Supplier Marine Airbags for Ship Launching
    • E CNC Woodworking Machine / CNC Router/Woodworki…
    • OEM Size Universal Power Coated Steel Roof Rack …
    • Sinotruk 4X2 Light Truck Crane 8t Cdw Light Cran…
    • Casting Parts with Powder Coating Finish
    • Small concrete mixer truck is more versatile
    • Water quality monitor plays an important role in…
    • Six major faults and treatment methods for ellip…
    • Installation knowledge of explosion-proof power …
    • The file self-service exchange box is gradually …
    • Industrial robot applications are still concentr…
    • Face recognition technology flow analysis algori…
    • Seed QR code traceability: sweep to obtain seed …
    • Radar level gauge maintenance considerations
    • Reasons for the decrease in the accuracy of the …
    • Introduction to the use of quantitative aerospac…
    • Fireproof chemical protective clothing use metho…
    • Solar insecticidal lamp stores electricity durin…