It's no accident that the customer chooses S&A once again. Our strength makes it so.
A laser company in Beijing mainly engaged in the development, production
and sales of laser processing equipment has established a branch office
in Xiamen. Now the branch office needs to purchase a water chiller to
cool their 200W coherent RF laser. As this laser company in Beijing had
used S&A water chiller before, the order was placed directly by the
headquarters, who purchased S&A CW-6200AN water chiller for the
Xiamen Branch Office to cool the 200W coherent RF laser.
The customer has said that this is because S&A water chiller
performs very well without any failure and good cooling effect has been
achieved. Then they purchased S&A water chiller without hesitation
for the branch office.
S&A has established a complete and strict quality management system
to realize the strict control on the acquisition of components, the
equipment production, the delivery and the after-sales service. As the
saying goes, sharp tools make good work. Since condenser is the center
of an industrial water chiller, S&A has invested millions of money
in condenser production equipment and made strict control on a series of
processes, including fins, bends and welding etc. to secure the quality
of condenser. Also the introduction of welding robots has significantly
improved and perfected the welding procedure. Therefore it can
efficiently prevent the machinery breakdown caused by solder skips. This
is also the main reason that why S&A water chiller has stable
quality.
The cooling parameter of CW-CW-6200: http://Products/ChillerCW62005100Wco.html
CONTACT S&A
TE:+86-20-89301885
FAX:+86-20-84309967
SKYPE: teyuchiller
Email:
Website: http://
What is the difference between a SDLG torque converter and a gearbox?
The torque converter is part of the automatic transmission (AT).
The torque converter consists of a pump wheel, a turbine wheel and a guide wheel. It is installed between the engine and the transmission and uses hydraulic oil (ATF) as the working medium to transmit torque, change torque, speed change and clutch.
The pump wheel and turbine of the torque converter form a closed working chamber that allows the liquid to circulate. The pump wheel is installed on the input shaft, and the turbine is installed on the output shaft. When the power machine (internal combustion engine, electric motor, etc.) drives the input shaft to rotate, the liquid is thrown out by the centrifugal pump wheel. After this high-speed liquid enters the turbine, it drives the turbine to rotate, and transfers the energy obtained from the pump wheel to the output shaft. Finally, the liquid returns to the pump wheel, forming a cyclical flow. The torque converter transfers torque by generating changes in momentum moment by the interaction of the liquid with the impeller and turbine blades. Its output torque is equal to the input torque minus the friction torque, so its output torque is always less than the input torque. The input shaft and output shaft of the torque converter rely on liquid connection, and there is no rigid connection between the working components.(Sdlg Loader Torque Converter,Hydraulic Converter Parts,Torque Converter,Low Speed Turbine Set)
Sdlg Loader Torque Converter,Hydraulic Converter Parts,Torque Converter,Low Speed Turbine Set
Shandong Tianfu International Trade Co.,Ltd. , https://www.tfloaderparts.com