You have to consider these points when choosing a suitable surveillance camera.

Network cameras and routers, switches, network hard disk recorders and other equipment groups were built as monitoring systems. Different application scenarios may have different requirements for the webcam. This article will give the specifications of the webcam that may bring different experiences in the actual application. Please select according to the actual needs.

1, shape

There are two main types: cylindrical and hemispherical. Among them, the cylinder type is relatively common, and it is common indoors and outdoors; the hemisphere type is generally used indoors, and the volume is small, and it can be installed by wall hanging or ceiling.

2, power supply mode

There are two kinds of DC DC power supply and POE power supply. The PoE power supply is powered by the DC power supply. It only needs to be connected to the PoE switch or the PoE network hard disk recorder to supply power. The construction and maintenance are simpler and more convenient.

Non-PoE power supply: Each camera needs wires, network cables, PVC bushings, sockets, security power supplies... a lot of accessories, the wiring is troublesome, the installation is complicated, and the maintenance is not easy.

PoE power supply: a camera with a network cable, data and power transmission at the same time, simple and convenient.

Compared with the two power supply modes, PoE power supply is more compact and the cost may be lower than that of non-PoE power supply.

3, lens focal length

The focal length of the camera lens is 2.8mm/4mm/6mm/8mm/12mm, etc. Each product series can choose the lens focal length, which can meet the shooting needs of indoor and outdoor environments. In general, the larger the focal length, the smaller the field of view and the farther the monitoring distance.

Put into the actual use scene, 2.8mm focal length is suitable for elevators, stairs and other relatively small environments, 4mm is suitable for meeting rooms, shops, slightly larger scenes, etc., but parking spaces, factory workshops, courtyards and other more open areas can be Use lenses larger than 6mm; the specific choice can be determined according to needs.

4, resolution

For surveillance cameras, clarity is critical. It is well known that the larger the resolution of the camera and the higher the sensor pixel, the clearer the image taken.

There are several specifications, the common ones are 1 million, 1.3 million, 2 million and 3 million. The corresponding resolutions are as follows:

So, is the higher the resolution, the better?

Indeed, a camera with a higher resolution and higher pixel size will have a better shot. However, it will take up more bandwidth and memory space, and the shorter the time the hard disk of the same size can be recorded.

Therefore, when choosing the resolution of the camera, you should also consider the storage problem when pursuing the definition, and choose the one you want. Of course, combined with timed recording and motion detection recording, the actual value of the hard disk storage will be longer.

5, night vision distance

If you want to monitor the night, you have to use the IPC with good night vision. The night vision distance is mainly determined by the number of infrared lamps. The night vision distance of a single lamp is 30 meters, and the night vision distance of a double lamp is 50 meters.

6, coding standards

There are two encoding standards supported by IPC and NVR: H.264 and H.265, which are next-generation coding standards that compress video size to half of the former without sacrificing image quality. With the same bandwidth, H.265 can transmit more HD video.

Of course, there are other factors that everyone can add.

UTECH Vision Localization/CCD Series include Laser Machine with CCD, Cnc Router With CCD, Laser Plotter With CCD, Oscillating Knife Cutter With CCD, etc.
Performance characteristics:
    Support for custom AOI, lower resolution to increase frame rate.
    Gain, exposure time and white balance programmable settings.
    Three working modes: continuous acquisition / soft trigger acquisition / external trigger acquisition.
    Support for exposure completion event notification.
    Output flash sync signal for precise synchronization of exposure and fill light.
    Support adjustment of packet length and packet interval, optimize multi-machine simultaneous acquisition and transmission.
    Support for lookup table, parameter group function.
    Provide color correction to improve the color reproduction of captured images.
    Rugged all-metal housing and cable locking device.
    Support single cable transmission up to 100 meters.
    Supports GENICAM and GIGE VISION for direct connection to third-party software such as HALCON and LABVIEW.

Vision Localization/CCD Series

3.2KW High Precision Spindle,Oscillating Knife Cut,KT Board Carving Tool,Corrugated Carboard Cut Device

Shandong U-May CNC Technology Co., Ltd. , https://www.sesamecnc.com