Ground effect wing ship, also known as ground effect aircraft, ground effect aircraft. It is an aircraft that uses the wing effect to fly. It uses the ground effect principle to achieve high-speed navigation close to the water surface (or ground). It is an aircraft that combines the characteristics of both ordinary aircraft and hovercraft. In April of this year, the CYG-11 type ground-effect wing ship manufactured and manufactured by Hainan Yingge successfully carried out the test flight in the South China Sea, which filled the gap in the field of ground-effect wing ships in China.
According to reports, this year Hainan Yingge will produce three 12-seat marine-effect wing ships. In the future, Hainan Yingge will have an annual productivity of 50. According to each 20 million yuan, the annual output value will reach 1 billion yuan. In the future, it will invest 5.5 billion yuan in Haikou to build a high-tech industrial park that integrates production, pilot training and helicopter maintenance and repair bases, covering an area of ​​about 1200 mu. Among them, the manufacturing base has the research and development, design, manufacture and application of the ground-effect wing ship, the research and development, design, manufacture and operation of the amphibious aircraft. The helicopter maintenance and repair base has the Mi-171 helicopter maintenance and maintenance base.
In order to make full use of Hainan's tourism resources and build a “high-speed railway†transportation network between coastal tourism projects, after the completion of the industrial park, it is planned to open a small-scale land-effect wing ship with less than 30 seats, and open Haikou, Sanya and radiation around the island. Short-distance sightseeing transportation route. In addition, the 50, 100 or 150-seat Wings will apply for the opening of scheduled flights in Haikou or Sanya to Sansha in 2014, and strive to complete the above projects in 2-3 years and gradually open more coastal cities. Direct flights to Haikou, Sanya, Boao and other places.
This kind of Commutator Fusing Machine can meet the requirement of different Commutator and armature dimension. It makes the whole fusing process far more iconvinient than by manual. This machine can also be connected to Armature Production Line to meet the mass production requirement.
It can greatly reduce the larbor forces. Firstly, operator needs to load the armature core to the required tooling position. Then adjust the wedling position as per the armature. After that, press the start button. Machine will do the commutator hook fusing process.
Commutator Fusing Machine,Commutator Welding Machine,Commutator Hot Stacking Machine
Ningbo Nide Mechanical Equipment Co., Ltd. , http://www.nide-auto.com