Round stainless steel rod

Round Stainless Steel Rod

Stainless steel rods come in various shapes, including flat, hexagonal, square, and round. Among these, the round stainless steel rod is one of the most commonly used due to its versatility and structural integrity. The surface roughness of hot-rolled stainless steel round bars is typically higher compared to cold-drawn ones. This is not an issue when the bar is primarily used for its strength and corrosion resistance. However, for aesthetic applications or outdoor fixtures where a smooth finish is desired, cold-drawn stainless steel round bars are preferred. These offer a More polished look with lower absolute roughness. The sizes of these bars can vary widely, with typical diameters ranging from 5mm to 450mm. For detailed pricing and size charts, feel free to contact us. **Key Features of Stainless Steel Round Bars:** - Excellent corrosion resistance - High durability and strength - Resistance to high pressure and temperature - Good dimensional stability - Long service life - Strong resistance to mechanical stress **Specifications of Stainless Steel Round Bar:** | **Material Grade** | **Details** | |--------------------|-------------| | 17/4PH Round Bar | High-strength, heat-treatable | | FV520B Round Bar | Used in aerospace and medical industries | | S31254 Round Bar | Known for superior corrosion resistance | | 904L Round Bar | Ideal for chemical and marine environments | | 310 Stainless Steel Round Bar | Resistant to high temperatures | | 321 Stainless Steel Round Bar | Suitable for high-temperature applications | | 304 Stainless Steel Round Bar | General-purpose stainless steel | | 316 Stainless Steel Round Bar | Popular for marine and industrial use | | SS 440B / 440C Round Bar | Hardened grades used in cutlery and bearings | | AISI 410 / 416 / 431 Round Bar | Magnetic and suitable for wear-resistant applications | | S31803 / S32760 Round Bar | Duplex stainless steels with high strength | **Dimensions & Standards:** - Available in DIN, EN, ASTM, JIS, ASME, BS, and AISI standards - Diameter range: 3mm to 800mm - Flat bar thickness: 2mm to 100mm; width: 10mm to 500mm - Angle bar size: 3mm x 20mm x 20mm to 12mm x 100mm x 100mm - Channel bar: 80 x 40mm to 150 x 75mm - Rectangular bar thickness: 3.0 to 12.0mm - Threaded bar diameter: 1/2 to 495mm - Hollow bar OD: 32mm to 250mm; ID: 16mm to 200mm **Surface Finish Options:** Cold (bright) drawn, centerless ground, hot rolled, smooth turned, peeled, slit rolled edge, hot rolled annealed, rough turned, bright, polished, grinding, centerless ground, and black. **Chemical Composition:** | **ASTM Grade** | **C** | **Mn** | **Si** | **S** | **P** | **Cr** | **Ni** | **Mo** | **Other** | |----------------|--------|--------|--------|--------|--------|--------|--------|--------|-----------| | 304 | 0.08 max | 2.00 max | 0.75 max | 0.030 max | 0.045 max | 18.0–20.0 | 8.0–11.0 | – | – | | 316 | 0.08 max | 2.00 max | 0.75 max | 0.030 max | 0.045 max | 16.0–18.0 | 10.0–14.0 | 2.0–3.0 | – | | 317L | 0.035 max | 2.00 max | 0.75 max | 0.030 max | 0.045 max | 18.0–20.0 | 11.0–14.0 | 3.0–4.0 | – | | 310S | 0.08 max | 2.00 max | 1.5 max | 0.030 max | 0.045 max | 24.0–26.0 | 19.0–22.0 | 3.0–4.0 | – | | 347H | 0.04–0.10 | 2.00 max | 0.75 max | 0.030 max | 0.045 max | 17.0–19.0 | 9.0–13.0 | – | 10C (Cb+Ta) <1.10% | | 321 | 0.08 | 2.00 max | 0.75 max | 0.030 max | 0.045 max | 17.0–20.0 | 9.0–12.0 | – | 5C 0.70% | **Mechanical Properties:** | **Grade** | **Tensile Strength** | **Yield Strength (0.2% Offset)** | **Elongation** | **Density** | **Melting Point** | |-----------|----------------------|----------------------------------|----------------|-------------|-------------------| | SS 304 | 75,000 psi (515 MPa) | 30,000 psi (205 MPa) | 40% | 8.0 g/cm³ | 1400°C (2550°F) | | SS 202 | 515 MPa | 275 MPa | 40% | 8.0 g/cm³ | 1454°C (2650°F) | | SS 303 | 85,000 psi | 45,000 psi | 50% | 55% | Rb 180 | | SS 304L | 75,000 psi (515 MPa) | 30,000 psi (205 MPa) | 40% | 8.0 g/cm³ | 1400°C (2550°F) | | SS 316 | 75,000 psi (515 MPa) | 30,000 psi (205 MPa) | 35% | 8.0 g/cm³ | 1454°C (2650°F) | | SS 316L | 485 Min | 170 Min | 40% | 8.0 g/cm³ | 1400°C (2550°F) | **Physical Properties:** | **Tensile (psi/Mpa)** | **Yield (psi/Mpa)** | **Elongation (%)** | **Hardness** | **Reduction in Area (%)** | |------------------------|---------------------|--------------------|--------------|---------------------------| | 75,000 (515) | 30,000 (205) | 30 | – | 40 | | 75,000 (515) | 30,000 (250) | 30 | – | 40 | | 75,000 (515) | 30,000 (250) | 30 | – | 40 | | 75,000 (515) | 30,000 (250) | 30 | – | 40 | | 75,000 (515) | 30,000 (250) | 30 | – | 40 | | 75,000 (515) | 30,000 (250) | 30 | – | 40 | **Hot Rolled Stainless Steel Round Bar Equivalent Grades:** | **UNS** | **AISI** | **Werkstoff** | **Outokumpu** | **ASTM** | |---------|----------|---------------|---------------|----------| | S31254 | 904L | 1.4547 | 254SMO | A276 | | N08904 | – | 1.4539 | 6Mo (Moly) | A479 | | EN10272 | B677 | – | – | – | | F44 | – | – | – | – | If you're looking for high-quality stainless steel round bars tailored to your specific needs, we offer a wide range of options with expert support and competitive pricing. Contact us today to discuss your requirements.

Silicone Bowl

Dongguan Huayuan Electronic Technology Co., Ltd , https://www.siliconefactory-oem.com